Xerox WorkCentre 5019 User Manual - page 80
Other manuals for WorkCentre 5019:
Specifications, Network Addendum
of
184
Copy
WorkCentre 5019/5021
User Guide
5-16
Press the ID Card Copy button to enable this feature.
Notes
•
Place an ID card in the upleft position.
•
Setting ID Card Copy to On automatically sets Reduce/Enlarge to 100%. You can
change the zoom ratio manually.
Follow the steps below to use the ID Card Copy feature.
1.
Place an ID card face down slightly away from the top left corner of the document glass, and then
close the document cover.
Placing the ID card too close to the corner of the document glass may not copy the edge of the ID
card properly.
Original document
Original orientation
Copied output
Front side
Front side
Back side
Back side