Xerox WorkCentre 5019 User Manual - page 92
Scan
WorkCentre 5019/5021
User Guide
6-6
Loading scan data using a PC-based application
This feature can be used to load scan data from a TWAIN-compatible or WIA-compatible application
installed on a computer. You can set the document load conditions from the PC display to enable you
to load the document while checking the scan results on the Preview screen.
Notes
•
Install the scan driver to use this function. For information on how to install the scan
driver, refer to
Installing the scan driver
on page 2-3.
•
The items you can set will vary according to the TWAIN-compatible and WIA-
compatible applications you are using.
•
The supported applications are 32-bit only.
Follow the steps below to perform the operation.
1.
Place the document.
Refer to
Placing the document
on page 6-1.
2.
Start an application to load the scanned data.
3.
From the File menu, select the item for the scanner (source).
4.
Select Xerox WorkCentre 5019/5021.
5.
Change other options if needed.
Note
For information on the scan functions, click Help in the screen to display the help
information.
6.
Click Scan.