Xerox Xerox 4112 Quick Start Manual - page 7
Xerox 4112/4127 Copier/Printer
Introduction
Quick Start Guide
1-3
Powering on and off
Switch on the power before operating the machine. The machine warms up in approximately
five minutes, after which you can make copies. Switch off the machine at the end of the day or
when it is not in use for a long period of time.
Power on
To power on the machine:
1.
Open the cover.
2.
Press the power switch to the on position[
|
].
Note
The "Please wait..." message on the UI indicates that the machine is warming up. The
machine cannot be used while it is warming up.
Power off
1.
Wait until all copy and print jobs have completely finished.
2.
Press the power switch to the off position [
].
9
Stop
Temporarily stops the current job. Follow the message to cancel or
resume your job.
10
Start
Starts the job.
11
Numeric Keypad
Enter the number of copies, a password, and other numerical values.
12
Clear
Deletes numeric values or the last digit entered.
13
Language
Changes text to an alternative language.
14
Log In/Out
Provides password protected access to the System Administration
menu, which is used to adjust the defaults on the machine.
15
Brightness dial
Adjusts the brightness of the Touch screen.
No.
Component
Function