Xerox Xerox 4112 User Manual - page 35
Xerox 4112/4127 Copier/Printer
Macintosh computers
PostScript User Guide
2-9
Hole Punching
Select the punching position. The holes are made based on the output orientation of the
paper. As a result, the holes may not be punched correctly depending on the position of the
image.
Hole Punching
Specify the number of holes to punch. Select from "Use Printer Settings," "2 Holes," or "4
Holes." If "3 Holes" is selected for "Hole Puncher Setup," only "Use Printer Settings" will be
available for selection.
Folding
Select the folding method.
Double Print
Enable this feature to repeatedly print one page twice on a paper with a bigger size than the
original. You can use Double Print feature if you have set the zoom ratio to 100% with the
following paper size and output size settings.
•
Paper Size
•
Output Size
•
A4
•
A3
•
A5
•
A4
•
B5
•
B4
•
Folio (8.5 x 11 in.)
•
Ledger (11 x 17 in.)
Booklet Creation
Specify the assembling and finishing methods for booklet creation. You can check the result of
the change in setting on the preview image at the top right of the screen.
Output Size for Booklet Creation
Specify the output size for booklet creation printing.
Booklet Subsets
Specify the number of sheets in each subset when printing booklet in subsets. Select from
"None," or "Every Sheet" to "Every 20 Sheets."
Skip Blank Pages
Specify whether to skip blank pages when printing documents that consist of blank pages.
Bypass Feed Orientation
Specifies the paper orientation when printing from the bypass tray. When feeding the short
edge of the paper first, select [Landscape]. When feeding the long edge of the paper, select
[Portrait].