Xiamen Youthnet TUTA-B23 User Manual - 3.2 Setup Master Number
TUTA-B23 GSM REMOTE CAMERA USER MANUAL
Note
•
Any MMS enabled mobile phone can receive the images captured by TUTA
camera by sending SMS command with password.
•
Any SMS enabled mobile phone can control TUTA camera with the password
command.
All the settings of TUTA camera can be set or adjusted via a SMS command.
About the SMS Command:
1) Master and families users’ SMS command format: #code#content#.
2) Guest users’ SMS command format: #code#password#content#.
3) The password must be a four-digit number.
4) The original password is 1234.
5) The maximum digits that are allows for the phone number is sixteen.
6) TUTA camera will reply to the user after it receives the SMS command.
Note
•
The “#” symbol must not be ignored when typing an SMS command.
•
No allow any space within the commands.
3.2 Setup master number
Master user has all the rights of changing camera settings and receives alarm
messages from camera. In order to enable all the functions on the camera, the Master
user must store his/ her mobile number in the camera’s memory. Only one Master’s
mobile number (Master number) is allowed for a camera.
3.2.1 Add a master number to the camera
If TUTA camera is being used for the first time, or TUTA camera has been reset, the
master user’s number must be programmed into the camera, in order to ensure
activation. The following methods can be used:
The Master user must edit and send the following SMS (text message) to camera from
mobile
phone (the phone number will be the Master number) to:
Setup master number: #00#
SIMnumber
# (1)
The SIMnumber is the camera installed SIM card number, it need to add country code
in front of the SIM number, for example #00#+49123456789# (+49 is the country code
of Germany, 123456789 is SIM number).
14