Xiamen Youthnet TUTA-B23 User Manual - 4.3.2 Camera Alarm
TUTA-B23 GSM REMOTE CAMERA USER MANUAL
start working and detecting body heat. TUTA camera will automatically send
alarm message or making a phone call once it be triggered.
•
TUTA camera has 20 seconds alarm-suspension period after it be armed. The
user can leave the camera place during this time to avoid misalarm.
Method 1:
The user sends following SMS message in order to:
Arming TUTA camera manually: #01# (23)
Method 2:
Press
on the remote control, whilst pointing it in the direction of TUTA camera.
TUTA camera will emit a “Beep” tone, to indicate that arming TUTA camera is
successfully. (Refer remote control instruction parts)
4.3.2 Camera alarm
Once the camera be triggered, the LED will flash fast in green, then turn red and flash
fast. It will sending alarm SMS, MMS or make voice calling according to the setting.
After it finish alarm process, camera will enter 20 seconds alarm-suspension period
and then it can alarm again.
4.3.3 Disarming TUTA camera
When user disarm the TUTA camera, all loaded wireless sensor, integrated infrared
body detector could not work. But it can send alarm only when the
button on
remote control is pressed.
Method 1:
The user sends following SMS message in order to:
Disarming TUTA camera manually: #02# (24)
Method 2:
Press the
button on the remote control, the camera will emit a BEEP tone and the
indicator light will flashing green to show the TUTA disarm successfully. (Refer remote
control instruction parts.)
4.3.4 Timed arming the camera
Master and family users send following SMS message in order to:
Enable timing arms the camera: #128#1# (25)
Set time period to arm the camera
:
(26)
#129#
WorkDay
#
ArmTime1
#
DisarmTime1
#...#
ArmTime3
#
Disarm
Time3
#
19