1. DL manuals
  2. XIEGU
  3. Transceiver
  4. X108G
  5. Operating Manual

XIEGU X108G Operating Manual

Summary of X108G

  • Page 1

    Hf transceiver chongqing xiegu technology co.,ltd 403,4th buildings,youth dreamworks, no.87, langkou industrial park, langkou community, dalang avenue,new district of longhua, shenzhen,china. Zip code: 518131 x108g outdoor version operating manual xiegu.

  • Page 2: Security Considerations:

    1 一、 specification’s basic specifications important reminder: before operating the equipment, please read our operating manual carefully and keep the manual, so as not to lose. Security considerations: do not use equipment during a lightning storm. Damp-proof! Don't illegal operations! Note rf high-...

  • Page 3

    2 i ． specification: basic specifications: frequency range: receive:0.5~30mhz （ continuous ） transmitting: all hf amateur bands including warc bands operating mode: ssb （ j3e ） cw （ a1a ） am （ a3e ） minimum frequency stepping: 10hz antenna impedance: 50 Ω operating temperature range: maximum tempera...

  • Page 4

    3 dynamic range:better than 90db rit frequency controlrange: ± 1khz audio output: 0.5w@8 Ω ii. Description of equipment 2.1 front panel description 1. Metal handle 2. Power switch/volume knob 3. Color oled display screen 4. Microphone port 5. Up key 6. Multi-function key 7. Main function knob(freque...

  • Page 5

    4 2.3 microphone 1. Lock button/press it again unlock 2. Ptt button: launch control button 3. Up / down: in the system settings menu, upper and lower entry selection 4. Receiving indicator 5. Multifunction 6. Filter selection buttons ： selection of built-in filter 7. Mode selection button ： selectio...

  • Page 6

    5 1. Pre-attenuator/preamplifier/voice compression 2. Receiving / transmitting status 3. Current operating frequency value 4. Current functional status: split, nb suppressor, agc, key mode 5. Received signal strength indicator 6. Real time power/swr indicators 7. The current input voltage display 8....

  • Page 7

    6 【 a=b 】 set vfo a the same as vfo b. 【 splt 】 select split operating mode on or off. 【 rit 】 select rit mode-adjust via selector main function knob, setting shown on rit display in screen 【 pow 】 set rf output power-adjust via selector main function knob, level displayed via red in screen 【 v/m 】 ...

  • Page 8

    7 【 sql 】 select to adjust squelch level via selector main function knob, level shown on line display in screen 【 cmp 】 voice compression settings. 3.2 start using your x108g 3.2.1 set the current operating frequency method 1: press the function button(ts+/ts-), move the frequency step to the requir...

  • Page 9

    8 3.2.5: attenuator on/off press the frequency knob to switch the current menu page, then press [ att ]. When the attenuator is on, att will be highlighted. Press this button again to close the attenuator. When the attenuator is off, att will appear dark. The attenuator provides 10 db attenuation. 3...

  • Page 10

    9 3.2.15: save current settings to memory press the frequency knob to switch the current menu page, then press [ v/m ] to choose channel mode. Turn the frequency knob until “blank” is highlighted. Press [ mw ] to return to frequency mode. In the lower left corner of the screen will be the symbol "ch...

  • Page 11

    10 3.3 extended interface 【 aux 】 no function 【 spk 】 external speaker output speaker or headphone(3.5 stereo socket); otherwise it will damage the rig. Before using the headphone, please decrease the volume. 【 keyer 】 telegraph key the telegraph key is automatic and manual integration. You can swit...

  • Page 12

    4 ： alc voltage output 5 ： external audio input 6 ： ground bandvoltage parameter 【 usb 】 usb port pc control or firmware update 【 dc in 】 power port power socket polarity, as shown: note ： power input range: 12~14.5v dc do not exceed the input voltage range and reverse 【 ground hole 】 【 ground screw...

  • Page 13

    12 1. If ssb: ssb if 2. If cw: cw if 3. Bfo lsb: bfo value lsb mode 4. Bfo usb: bfo value usb mode 5. Bfo cw: bfo value of the cw mode 6. Cw tone: cw side tone pitch frequency adjustment 7. Cw tdly: cw launch delay 8. Tot: 9. Britns: 10. Ddsclk: system clock 11. Dclkx6: dds multiplier settings 12. S...

  • Page 14

    13 n after setting, press [ save ] key to save and exit setup. N if press exit , not save and exit setup. 3.4.2 user-defined on call sign display x108g can display of custom boot interface information. The system default display is “xiegu”, users can customize this content. The method is as follows:...

  • Page 15

    14 iv general troubleshooting the following points out the troubleshooting for the general problem, if you still can not solve the problem, please do repair, please do not disassemble the machine, or you will lose the warranty. Fault description possible reasons resolvent unable to turn on your x108...

  • Page 16: Contact Us

    15 after sales service policy 1. Warranty clause : when buyer from the point of sale who has obtained the authorization of xiegu to buy our products, within two weeks after purchase, if host, multifunctional microphone, shell structure of the host, the usb data lines, power lines appear the performa...

  • Page 17

    Www.Cqxiegu.Com xiegu.