1. DL manuals
  2. XIEGU
  3. Transceiver
  4. X108G
  5. Operating Manual

XIEGU X108G Operating Manual

Summary of X108G

  • Page 1

    1 hftransceiver v1.01a outdoor version revise: 2016-1 copyright © 2016, xiegu, inc. X108g operating manual xiegu tech.

  • Page 2: Security Considerations:

    2 all rights reserved important reminder: before operating the equipment, please read our operating manual carefully and keep the manual, so as not to lose. Security considerations: do not use equipment during a lightning storm. Damp-proof! Don't illegal operations! Note rf high-voltage of antenna c...

  • Page 3

    3 一、specification’s basic specifications frequency range: receive:0.5~30mhz（continuous） transmitting: all hf amateur bands including warc bands operating mode: ssb（j3e） cw （a1a） am （a3e） minimum frequency stepping: 1hz antenna impedance: 50Ω operating temperature range: -10℃ ~ +60℃ frequency stabili...

  • Page 4

    4 dynamic range:better than 90db rit frequency controlrange: ±1khz audio output: 0.5w@8Ω 二、 description of equipment 2.1front panel description 1. Metal handle 2. Power switch/volume knob 3. Color oled display screen 4. Microphone port 5. Up key 6. Multi-function key 7. Main knob 8. Down key 2.2rear...

  • Page 5

    5 2.3 microphone 1. Lock button/press it unlock again 2. Ptt button 3. Up / down frequency/channel 4. Receiving indicator 5. Multifunction 6. Filter selection buttons 7. Mode selection button 8. No indication 9. F1/f2 custom set key 10. Memory write button 11. Frequency/channel switching button 12. ...

  • Page 6

    6 【agc】 select agc level – fast/slow/off. 【nb】 select nb level between 1 and 4. 【a/b】 switch between vfo a & vfo b. 【a=b】 set vfo a the same as vfo b. 【splt】 select split operating mode. 【rit】 select rit mode – adjust via selector knob b,setting shown on rit display in oled. 【pow】 set rf output powe...

  • Page 7

    7 【sql】 select to adjust squelch level via selectorknob b, level shown on line display in oled. 【vcmp】 voice compression settings 3.2.2: mode switching method 1: press the frequency knob to switch the current menu page, then press [mode].Press corresponding multifunction button, to complete mode swi...

  • Page 8

    8 when the attenuator is on, att will be highlighted green. When the attenuatoris off, att will appear dark. The attenuator provides 10 db attenuation. 3.2.6: automatic gain control on/off press the frequency knob to switch the current menu page, then press [agc]. Agc options are fast or slow with t...

  • Page 9

    9 press the frequency knob, switch to the [pow] menu page, then pressing the corresponding function key, you can enter the transmit power settings.At this point, the power set on the screen will display po, press [up/down] key, you can change the transmission power value and save it. 3.2.13: switchi...

  • Page 10

    10 3.2.18: automatic telegraph key rate press the frequency knob, switch to [kspd] menu page, then pressing the corresponding function key, press the [up/down] key， set the automatic key rate. 3.2.19: set the local time press the frequency knob to switch the current menu page, then press [time]. The...

  • Page 11

    11 【aux】no function 【spk】external speaker output speaker or headphone(3.5 stereo socket); otherwise it will damage the rig. Before using the headphone, please decrease the volume. 【keyer】telegraphkey the telegraph key is automatic and manual integration.You can switch in the menu. 【acc】acc port pin ...

  • Page 12

    【usb】usb port pc controlor firmware update 【dc in】 power port power socket polarity, as shown: note ：power input range: 12~14.5v dc do not exceed the input voltage range and reversepolarity 【ground hole】 【ground screw】 3.4.Advanced menu settings caution: these settings are directly related to the co...

  • Page 13

    13 in the shutdown state, press and hold the f1 key on the host and turn on (note, do not release) until the screen displays the data of the engineering menu, as shown below: 1. If ssb: ssb if 2. If cw: cw if 3. Bfo lsb: bfo value lsb mode 4. Bfo usb: bfo value usb mode 5. Bfo cw: bfo value of the c...

  • Page 14

    14 after sales service policy 1. Warranty clause: when buyer from the point of sale who has obtained the authorization of xiegu to buy our products, within two weeks of purchase, if host, multifunctional microphone, shell structure of the host, the usb data lines, power lines appear the performance ...

  • Page 15

    15 2. Warranty limitation clause: the following restrictions on the warranty services, applicable to the host and all accessories，meet one of the following circumstances, we will cancel the warranty: a． without permission and authorization, modification, removal, maintenance of the host’s chip; b． c...

  • Page 16: Xiegu Tech

    16 note i. Contact us: xiegu official website: http://www.Cqxiegu.Com/index.Php?Route=common/home ii. Xiegu authorized distributor’s list: http://www.Cqxiegu.Com/index.Php?Route=information/information&mid =3 xiegu tech.

  • Page 17

    17 无线科技，无限创造 www.Cqxiegu.Com xiegu tech.