Xilinx Spartan-3E User Manual - page 33
Manual is about: Starter kit Board
of
164
Spartan-3E Starter Kit Board User Guide
33
UG230 (v1.0) March 9, 2006
Programming the FPGA, CPLD, or Platform Flash PROM via USB
R
To regenerate the programming file, double-click
Generate Programming File
, as
shown in
.
Generating the PROM File
After generating the program file, double-click
Generate PROM, ACE, or JTAG File
to launch the iMPACT software, as shown in
After iMPACT starts, double-click
PROM File Formatter
, as shown in
Figure 4-12:
Double-Click Generate Programming File
UG230_c4_13_022706
Figure 4-13:
Double-Click Generate PROM, ACE, or JTAG File
UG230_c4_14_022706