Xilinx Spartan-3E User Manual - page 92
92
Spartan-3E Starter Kit Board User Guide
UG230 (v1.0) March 9, 2006
Chapter 12:
SPI Serial Flash
R
Formatting an SPI Flash PROM File
After generating the program file, double-click
Generate PROM, ACE, or JTAG File
to launch the iMPACT software, as shown in
After iMPACT starts, double-click
PROM File Formatter
, as shown in
Choose
3rd Party SPI PROM
as the target PROM type, as shown in
. Select
from any of the PROM File Formats; the Intel Hex format (
MCS
) is popular. The PROM
Formatter automatically swaps the bit direction as SPI Flash PROMs shift out the most-
significant bit (MSB) first. Enter the
Location
of the directory and the
PROM File Name
.
Click
Next >
when finished.
Figure 12-6:
Double-Click Generate PROM, ACE, or JTAG File
Figure 12-7:
Double-Click PROM File Formatter
UG230_c15_05_030206
UG230_c15_06_030206