XK DHC-2 A600 Quick Start Manual - page 13
-12-
The status
reason
countermeasure
Push the motor but
motor did not start
properly, motor in turn.
Motor and ESC bad contact
or motor break down.
Motor socket connecting
or change motor.
Motor gear appear less teeth.
Replace the motor with problem.
Vibration when the
motor run at it.
Blade transformation ,blade hoop and motor
position is not firm or blade hoop fracture.
Replacing the Blade and blade hoop
which are with problem. The blade
hoops fixed firmly, Motor need
to be fixed.
The model flying yaw, can
not flight straight
Blade transformation ,blade hoop and motor
position is not firm or blade hoop fracture.
Motor fixing seat loose.
1.The rudder in the back.
2.Gyroscope Zero
Adjustment
When flying ,gyro
no working,can
not repair
gyro out of order
need to replace the receiver
When plane landed or
throttle joystick on the
bottom position, motor
is still working
Because when flying you make
the throttle trim too high
Pls make a adjustment to the
throttle trim to the middle point
The motor socket connection
and replace motor rocker
control individual servo will
be appear rudder-blocked.