XOVision XOD1840BTNAVI Operation Manual - page 12
13
49
Installation
02
12
2
3
4
4
Wiring Connection
AUX Audio Input
(Black Line with red
and white head)
AUX Video Input
(Black Line with
yellow head)
Rear Video
(Dark Grey with
yellow head)
Front RCA L/R
(Dark Grey line with
red & white head)
Rear RCA L/R
(Light Grey line with
red & white head)
Reversing Signal Input
(Brown Line with
yellow head)
TV Antenna
(Optional)
The brown wire is connected with brake signal; for safety, the programs can be seen on the monitor
after braking the car, but the menu and RCA output are free of it.
If you do not want to use this function, connect it with the negative pole.
Do not connect the pink wire to the battery,otherwise it will use up the power of battery.
Note:
*
1
Reverse Gear
Orange
Red
Yellow
Black
Ignition Key
Battery +
Ground
Rear L
Speaker
Front L
Speaker
Green/Black
Green
White/Black
White
Brown
Pink
Violet/Black
Blue
Violet
Grey/Black
Grey
Parking Brake
Lamp In
Antenna
power +
Rear R
Speaker
Front R
Speaker
4
1
Output Plug(Male)
Install Screw Holds
2
Output Socket(Female)
+
-
+
-
+
-
+
-
Black
Ground
3
Tuner Receptor (optional)
GPS Operation
POI Searching
(Picture A-1-3)
In the interface of Picture A-1, press POI Search
to open a menu as Picture A-1-3. Now you can
search a place by POI search.
In the condition of Picture A-1-3 ,there are 8
POI types for searching. So you can select type that
you need, and the display will show a sub directory.
Press POI type or that you need to open the
position and show it on maps in the list of the
subdirectory.
In the interface of Picture A-1, press MAP to
open a GPS search interface as Picture A-1-4.
To zoom out, zoom in or move the cursor to point
to a place. After selecting a point, press to
edit menu.
Map Searching
(Picture A-1-4)
Picture A-1
You can edit menu in this mode.
* Press Navigate to enter navigation, turn to page 52 for
details.
* Press Via to set stopover, turn to page 53 for details.
* Press Save to save the address , turn to page 48 for details.
* Press On Map to show the point, press or to display
the previous current POI address or next one, and also can play other common operation.
* Press Description to show the idiographic information. Such as address, telephone number,
fax number and so on, press or to display the previous current POI address or next
one.
Picture A-1
You can edit menu in this mode.
* Press Navigate to enter navigation, turn to page 52 for
details.
* Press Via to set stopover, turn to page 53 for details.
* Press Save to save the address , turn to page 48 for details.
* Press Search to search a place by POI.
* Press Back to go back to the previous menu.
* Press Map Setting to set map, turn to page 50 for details.
GPS Antenna