XOVision XOD1840BTNAVI Operation Manual - page 8
13
Before You Start
01
53
8
REMOTE Infrared Sensor
+/ -
SRC/PWR
During waiting mode, brief press it to turn on
the unit; during working status, brief press it
to select radio mode or playback mode/hold
and press it to turn the unit on or off.
Disc Loading Slot
[ ]/[ ] (Previous Track/Next Track/Adjust
Frequency) Button
SEL/NAV Button
MUTE Button
Briefly press it to mute; keep press it to
switch to the night mode.
Briefly press it to select the function; keep
press it to activate the double function.
Press +/- to increase or decrease the volume,
and press them to adjust functions of the SEL
button.
Press and hold REL, and then press +/- to
adjust angle.
REL Button
Press it to slidedown the monitor, then you
can insert or eject a disc or a SD card.
Press and hold it, the monitor shows ANGLE,
then press +/- to adjust angle.
Press it to set the unit to initial status.
RESET Button
Press REL first before you load the disc.
Press it to eject a disc.
(Eject) Button
SD Card Slot
GPS Operation
(Picture A-1)
In the interface of Picture A-1, press
Settings to open a menu as Picture A-3.
There are general settings, map settings,
route settings and volume adjustment.
Change General Settings
In the condition of Picture A-3,press General
Settings icon to show the general setup menu
as Picture A-3-1. You can set the language,
time, mile on map.
General Settings
(Picture A-3)
* Press Language to select your local country, and select the
language you need to display on map.
* Press Miles to select kilometre or mile.
(Picture A-3-1)
Map Settings
* Press Info Layer to select the icon displayed on map, if you want it to
disappear, press to cancel.
* Press Day to set the mode as: day, night or auto.
* Press Maps to select the different edition.
* Press 3D to select 3D or 2D mode.
* Press Set Time to select the time district.
* Press About to show the current edition.
* Press Track Up to set orientation way, to select Track Up goes to more accurately when
navigates, to select North Up, the index will always point at north.
In the condition of Picture A-3, press Map Settings icon to
show the map setup menu as Picture A-3-2. You can set the
info layer, display mode, map edition, 3D mode and orientation.
(Picture A-3-2)
In the condition of Picture A-3-2:
Navigation SD Card Slot