XPS Concrete Genie Manual - page 4
3
2
DANGER MEANS:
Severe bodily or death can occur to you or other personnel if the DANGER statements found on this machine or in this Owner’s Manual are ignored
or are not adhered to. Read and observe all DANGER statements found in this Owner’s Manual and on your machine.
WARNING MEANS:
Injury can occur to you or to other personnel if the WARNING statements found on your machine or in this Owner’s Manual are ignored or are not
adhered to. Read and observe all WARNING Statements found in this Owner’s Manual and on your machine.
CAUTION MEANS:
| Damage can occur to the machine or other property if the CAUTION statements found on your machine or in this Owner’s manual are ignored or
not adhered to. Read and observe all CAUTION statements found in this Owner’s Manual and on your machine.
DANGER
1.
Failure to read the Owner’s manual prior to operating or attempting any service or maintenance procedure to your machine
could result in injury to you or other personnel; damage to the machine or to other property could occur as well. You must
have training in the operation of this machine before using it. If your operator(s) can not read English, have this manual ex-
plained fully before attempting to operate this machine.
2.
To reduce the risk of fire, use only commercially available detergent intended for machine application. Do not use with flam-
mable liquids.
3.
Risk of explosion. Floor sanding can result in an explosive mixture of fine dust and air. To reduce risk of explosion, use floor
sanding machine only in well ventilated area.
4.
Operating a machine that is not completely or fully assembled could result in injury or property damage. Do not operate this
machine until it is completely assembled. Inspect the machine before operation.
5.
Electrocution could occur if maintenance and repairs are performed on a unit that is not disconnected from the power
source. Disconnect the power supply before attempting any maintenance or service. Always remove the electrical plug from
the electrical outlet before changing the brush, pad or other attachment and before leaving the machine.
6.
Using a machine with a damaged power supply cord could result in an electrocution. Do not use the machine if the power
supply cord is damaged. Do not use the electrical cord to move the machine.
7.
Maintenance and repairs performed by unauthorized personnel could result in damage or injury. Maintenance and repairs
must be performed by authorized personnel only. Keep all fasteners tight, Keep adjustments according to specifications.
8.
Electrical components of this machine can”short-cut” if exposed to water or moisture. Keep the electrical components of the
machine dry. Wipe the machine down after each use. For storage, keep th machine in dry building.
9.
Always use a four core electrical system connected to the electrical ground. For maximum protection against electric shock,
use a circuit that is protected by a ground fault interrupter. Consult your electrical contractor.
10. To prevent damage to the power supply cord, do not let the pads, pad holders or wheels touch the power supply cord when
the machine is running Always lift the cord over the machine. Do not pull the power supply cord to move the machine.
WARNING
1.
Operating a machine without observing all labels and instruction could result in injury or damage. Read all machine labels
before attempting to operate. Make sure all of the labels and instructional information are attached or fastened to the ma-
chine. Get replacement and decals from your authorized distributor.
2.
Use of this machine as a stair or furniture could result in injury or damage. Do not sit on the machine.
3.
To prevent accidental injury, place your hands, feet and loose clothing away from moving parts of machine.
4.
Injury to operator or bystanders could occur in an abrupt change in floor surface texture is encountered when using this
machine. Abrupt change in floor surface can cause a sudden pulling motion by this machine. This sudden pulling motion
can result in loss of control of the machine which could injure the operator or bystanders. Avoid motions that could allow the
machine to come in contact with low obstacles, such as floor electrical outlets, door stops or entry molding, etc.
5.
Water solutions or grinding and polishing materials used with the machine if adopting wet polishing can leave wet areas on
the floor surface. These areas can cause dangerous condition for the operator or other persons. Always put CAUTION signs near
the area being.
6.
Any alterations or modifications of this machine could result in damage to the machine or injury to the operator or other
bystanders. Alterations or modifications not authorized by the Manufacturer voids any and all warranties and liabilities.
NOTE
1.
The machine is heavy. Get assistance before attempting to transport or move it.
2.
This appliance is not suitable picking up hazardous dust.
3.
This machine is intended for commercial
Manual - Concrete Genie