Xsories Weye Feye User Manual - page 10
of
13
FIRMWARE UPGRADE
6
there is enough battery to do the upgrade.
This is
very important!
Plug the USB disk into the Weye Feye and turn
it on. The LED close to the USB port will blink
for about 10 seconds until the device is ready.
HOW TO UPGRADE THE WEYE FEYE
Two attachments:
- The Weye Feye firmware
- The Android App
STEPS:
PREPARE THE USB DISK
Unzip the attached WFPackUpgrade.zip file on a
USB disk, and arrange the folder as on the picture
below.
H drive:
\- WFPackUpgrade
\- upgrade.bin
PREPARE THE WEYE FEYE
Before upgrading the firmware of the Weye Feye,
please fully charge the battery. To make sure the
battery is full, press the button. The LED close to the
button will show the battery status. Green means
1
2
10
3