Xterra 16204761500 Owner's Manual - User Direction
customerservice@dyaco.ca
Dyaco Canada Inc 2017
21
USER DIRECTION
HOW TO USE THE EXERCISE BIKE
HOW TO ADJUST THE HEIGHT OF THE SEAT
HOW TO ADJUST HORIZONTAL POSITION OF THE SEAT
HOW TO ADJUST THE PEDAL STRAPS
HOW TO MOVE THE EXERCISE BIKE
HOW TO LEVEL THE EXERCISE BIKE
HOW TO CHANGE MILES TO KM
Unplug the adaptor from the cycle.
Press the start/stop button, the enter button and the up button all at theime and connect the adaptor.
same time and connect the adaptor. Screen will beep and turn on.
Press the enter button until the miles or km is flashing.
Press the up button to change to km.
Press enter button until the monitor resets.
Your cycle is now in km.
For effective exercise, the seat should be at the proper height. As
you pedal, there should be a slight bend in your knees when the
pedals are in the lowest position. To adjust the seat, first loosen the
adjustment knob a few turns. Next, pull the knob outward, slide the
seat post upward or downward to the desired position, and then
release the knob. Move the seat post upward or downward slightly
to make sure that the knob is engaged in one of the adjustment
holes in the seat post. Then, tighten the knob.
If you want to adjust horizontal position of the seat, first you can
release the club knob. Next, move the seat forward or backward.
Then retighten the knob after you find the desired position.
The strap for the pedal is adjustable.
Please select the proper holes to fix the straps.
The bike can be easily moved from room to room.
Grasp the handlebar and pulling back on handles, tip machine
towards you.
The bike is equipped with adjustable end caps.
If the unit is wobbly, please turn the wheel on the leveling caps of
the rear stabilizer to level the unit.