Xterra 16204770480 Owner's Manual - Xt 4.8

customerservice@dyaco.ca

Dyaco Canada Inc 2017

8 

XT 4.8

ASSEMBLY INSTRUCTIONS

This manual is designed to help you easily assemble, adjust and use this machine. Please read 

this manual carefully. For the sake of familiarizing yourself with the parts identified in the 

instruction, first study the overview drawing. 

Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list 

for help to identify the parts. 

It will take two people to assemble your unit.

ENSURE THAT ALL NUTS AND BOLTS ARE FIRMLY TIGHTENED AFTER EACH STEP 

STEP 1 

1.  Attach the front stabilizer (15) to the main frame (16). Secure using two carriage bolts (3), 

two flat washers (5) and two domed nuts (6). 

2.  Attach the rear stabilizer (4) to the main frame (16).  Secure using two carriage bolts (3), two 

flat washers (5) and two domed nuts (6).  

STEP 2

1.  Release the nuts on the backside of seat (13), attach the seat (13) to sliding tube (12), and 

then re-tighten the nuts. 

2.  Insert the sliding tube (12) into the seat post (10). Secure using a quick release knob (7). 

3.  Insert the seat post (10) into the Main frame (16). Secure using a quick release knob (7). 

Note: The seat can be horizontally and vertically adjustable after your cycle is fully 

assembled.