Xterra 16416880-1 Owner's Manual - page 22
Customer Service 1-888-707-1880 Maurice Pincoffs Canada Inc
©2011
21
TROUBLE SHOOTING
Problem
Cause
Correction
Monitor does not display
Adaptor not plugged in or batteries not
installed
Plug adaptor in or insert batteries
No speed or distance displays
on the monitor
Sending unit not connected
Securely
plug
sending
unit
into
extension wire and the back of the
monitor
Sending unit not working properly
Replace sending unit
Monitor not working properly
Replace monitor
No tension
Gear box wire not connected
Securely connect the gear box wires into
the extension gear box wire
Magnetic wheel not working properly
Replace magnetic wheel
Heart rate not displaying
Pulse wire not connected not connected
Securely plug wires together
Hand pulse defective
Replace hand pulse grip
Monitor not working properly
Replace monitor
Grinding
Crank bearing defective
Replace crank bearings
Idler pulley defective
Replace idler pulley
Mag wheel defective
Replace magnetic wheel
Squealing
V-belt slipping
Adjust v-belt
MAINTENANCE SCHEDULE
PART
RECOMMENDED ACTION
FREQUENCY
CLEANER
LUBRICANT
Pedals
Ensure that pedals are tight in
crank arms; that all screws on
pedals are tight; and that the
pedal straps are not frayed
Before each
use
N/A
N/A
Frame
Wipe down by using a soft damp
clean cloth
Daily
Water
N/A
Flywheel
Wipe down by spraying on a rag
and applying a light coat to sides
of the flywheel
Weekly
WD-40
spray.
N/A
Brake
Pad
Inspect for excessive wear or a
dry leather brake pad
Weekly
N/A
3-IN-ONE Oil or 10W oil. Do
not use silicone-based
lubricants
1
. Do not service internal parts of pedals. If they are found to be worn internally, we recommend replacing
the pedal.
2. Use of lubricants or cleaning solutions other than those so specified will result in diminished performance
and a shorter life span for that part.