Yale SHAW-BOX Operation & Service Manual - General Information
1
General information
03.2018
9
ba
-o
.2
.6
.0
-us
-1.
1-
y
|
A
11
86
75
01
R
ev
A
A
1.8
After-sales service
You have purchased a high-quality product. Our after sales service will give you advice
on its correct use.
In order to maintain the safety and constant availability of the product, we recommend
concluding a maintenance agreement.
Seminars:
Comprehensive understanding of material handling products is a prerequisite for the
correct use of equipment. Competent and practically oriented, we impart the specialist
knowledge required for the correct use, monitoring and care of your system.
Ask for our seminar program.
1.9
Periodic inspections
•
Hoists and cranes must be inspected by a qualified person least once a year, more
frequently if so specified by national regulations.
•
The results of the inspections must be recorded and filed in the test logbook.
•
The remaining service life of the hoist must also be established during this inspection.
•
The periodic inspections
must be adapted to the hoist’s use. Intensive use or adverse
environmental conditions entail shorter maintenance intervals.
All tests must always be initiated by the owner!
1.10
Environmental information
Environmental aspects have been taken into account when developing and
manufacturing this equipment. Please note the instructions on safe lubrication and waste
disposal to avoid pollution risks during use. Appropriate use and correct maintenance will
improve the environmental performance of this product.
1.10.1
Life cycle assessment
The stages of the product service life are:
•
Production of materials,
•
components and energy,
•
transport to factory,
•
manufacture and assembly,
•
transport to customer,
•
on-site installation,
•
operating phase including maintenance and modernization,
•
dismantling and recycling of materials at end of service life.
1.10.2
Energy consumption
The energy consumption during the operating phase has the highest impact on the
environment. Electricity is required for starting and running the motors and for lighting,
heating, cooling and other optional electrical components and parts of the hoist.