22
PIR Motion Detector LED flashes
• Batteries are low or the tamper switch is disturbed. Check
your app for device battery status. Change them if they are
running low. Check that the tamper switch spring is making
contact with base (See page 15).
PIR Motion Detector does not respond to
movement
• Batteries are completely exhausted. Check your app for
device battery status. Change the batteries (see page 15)
PIR Image Camera & PIR Video
Camera
LED flashes every 20 minutes
• Device out of range of the Smart Hub.
* If a PIR Image Camera or PIR Video camera is not learnt
into the system or within range of the Smart Hub, battery
life will be greatly affected while it searches for a connection.
Smart Hub LED 2 (Warning LED)
Consumer Support
Should you have any questions or experience a problem with
your Smart Home Alarm Kit, please check our troubleshooting
sections within the app. (select the
? at top right of the screen
you need help with) Or alternatively go to our FAQ section at
yale.co.uk/help.
Troubleshooting
(cont.)
9
(10)
(GB) Reset - (IT) Reset - (DE) Reset - (NO) Tilbakestill - (SE) Återställning - (DK) Nulstil .
Lear
n
Pow
er
LAN
Batt
ery
ff> Batt ery ff> Lear n Pow er LAN Batt ery ff> HOME SERVER GB - Network IT - Rete DE - Netzwerk NO - Nettverk SE - Nätverk DK - Netværk GB - Fault Status IT - Guasto Stato DE - Fehlerstatus NO - Feil Status SE - Felindikering DK - Fejlstatus GB - PANEL MODE IT - Modalitá Pannello DE - Panel-Modus NO - Panel Mode SE - Larmstatus DK - Panel tilstand 4 (GB) Setting up - (IT) Configurazione - (DE) Einstellung - (NO) Tilkobling og montering av alarmsentralen - (SE) Driftsättning - (DK) Opsætning.