YAMADA DTR-1000HX User manual - page 21
39
HDD Play Mode
If you are using the default value of setup->Timeshift->Timeshift default source-> Tuner(ON). When the product
is turn on, the system will enter into Tuner state. Timeshift turn on mode automatically, when select FCVBS(OFF)
item. Enter into FCVBS state, Timeshift turn off mode.
If you are using the default value of Setup-> HDD->Timeshift Buffer->Refresh, and change Channels, the
Time shifting buffer data will be lost. No message will be provided prior to doing so. However, if you set
Setup-> HDD->Time shift Buffer->PRESERVE, and change Channels, the Time shifting buffer data will be
maintained.
Note: If you change the input source of video and the video
standard is different (NTSC vs. PAL), the Time shifting buffer
will be erased.
Note: During Time shifting, a Timer recording (programmed
recording) may come up. As you can not watch one program in
Time shifting and record another channel, the product will ask
you to confirm if you want to keep the current channel or proceed
with Timer recording. If there is no response, the product assumes
Timer recording should be started. The message will appear 2
minutes before the Timer recording is due.
Time shifting is stored in a buffer that contains 60 minutes of recording. After 60 minutes, the buffer will be
progressively overwritten. If you need to keep the video contained in this buffer for future use, you can
Save all or part of the buffer.
Save
In order to Save from within Time shifting buffer, two options are available:
Save Option 1. While viewing a program, press Rec. This will start saving the segment you are watching. You
can navigate forward. During the saving operation, by pressing Rec, you will increase the length of the
program you are saving by 30 minutes up to a maximum of 3 hours. Press STOP to indicate the end of the
saving operation. The saved part of the time shifting buffer will be tagged in red color.
Save in Time shifting buffer
Save Option 2. While viewing a program, press Rec and hold down for 3 seconds. This will save the entire
Time shifting buffer. If Stop is pressed, the saving will terminate at that point in the buffer. During the saving
operation, by pressing Rec, you will increase the length of the program you are saving by 30 minutes up to a
maximum of 3 hours. Press Stop and hold for 3 seconds if you want to cancel the entire saving operation.
Note: You cannot change the channel or the source if saving is on-going (the end of the recording segment is
either not entered, or in case of long recording, it has not been reached). Saving has to be manually stopped
first (by pressing STOP). The product will request you to Stop saving first. The segment will be Saved on HDD
and then channel or source change can be performed.
Note: Only one segment in the Time shifting buffer can be identified for Saving. It is not possible to identify
multiple segments. Once the segment has been Saved and registered on Title list, this segment (and its preceding
video part) will be removed from the Time shifting buffer.
Time shifting: Record, Stop, Pause, Play keys.
Other options: DVD, Timeshift, USB, Setup, Timer, Source Keys
18:15
19:15
19:06
20
1
2
3
4
5
6
7
8
Introduction
For finalized discs, every title consists of only one chapter. There is no such function as selected chapter play or
random programmed play of disc segments for such discs. The index icon of each title is determined by the system.
As every title consists of only one chapter, it is inconvenient to browse the disc when you desire individualized
appreciation. The chapter editing function is to solve such problem.
Enter the Chapter Editing Mode
When the disc in the drive is DVD+R/RW and the system is in the DVD Root menu, Press or to high
light the title that you want to edit, then press to show the edit menu and select edit to enter the
Chapter Editing mode and the Chapter Editing control bar menu will appear.
Note
The Chapter Editing function is only available for DVD+RW discs.
If the DVD+RW disc is write-protected or the current mode does not allow the entrance of Chapter Editing mode,
the remedy for the former is to cancel the write protection with
disc operation, and in the latter case, just exit the mode.
Menu Description
The chapter editing control bar menu is as shown in the
following chart and the meanings for each item are as
follows:
1. Title: The left number under the icon is the current
title to be edited; the right is the total number of the
titles in the disc.
2. Chapter: The left number is the current chapter; the
right is the total number of chapters in the title.
3. Play: The function is the same as the Play Mode.
4. Chapter Mark:. Split or Combine Chapter function.
5. Hide Chapter: Hide or Show Chapter function.
6. Index Picture: Change the index picture.
7. Split Title: Split the title in two.
8. Time: Time Selection Play.
Chapter Editing
Editing Mode
Title
04/04
Chapter
01/01
Play
Chapter marker
Hide Chapter
Index picture
Split title
Time: 0
00
02
Editing Mode
Title
--
Chapter
01/01
Play
Chapter marker
Hide Chapter
Index picture
Split title
Time: 0
00
02
SETUP MENU -TimeShift
1
DVB(ON)
Refresh
Show
Automatica
GO!
OK
Timeshift buffer Length
Timeshift default source
Timeshift buffer mode:
Hard disk Info
Space Management
Empty hard disk
Erase optical disc
60 minutes