YAMADA DTR-1000HX User manual - page 30
Play a DVD
DVD
MODE: Normal
Trick mode:
TITLE: 01/01
CHAPTER: 02/14
AUDIO: 01/03-OTH
SUBTITLE: 01/03-OTH
ANGLE: 01/01
T-TIME: 00:02:04-00:51:25
30
Play Mode Control
There are four playing modes for the unit, including Normal Play, Repeat Play, Prog ram Play and Ran dom Play.
The operations are as follows.
Normal Play
1.
Press the “Display” button to enter the menu.
2. Press the
,
and
SELECT
buttons to select the first item in
the control bar, Play Mode.
3. Press the
or
button to select the Normal Play value, and then press the
SELECT
button to enter the
Normal Play mode.
4. Pressing the
PLAY button directly is another way preform Normal Play.
There are various Repeat Play modes, including Repeat Title (DVD only), Repeat Chapter (DVD only), Repeat
Disc (DVD/SVCD/VCD), A-B Repeat, etc.
1. In the play control bar menu, press the
,
and
SELECT
buttons to select the first item, Play Mode
Control.
2. Use
or
button to select a proper value, press the
SELECT
button and the system will play with the corre-
sponding Repeat Play mode.
3. Pressing the
REPEAT
button directly is another way to repeat play operation.
4. If the value selected is
A-B Repeat
, press the
SELECT
button and the system will indicate that Point A
is set, please set the next point. Press the
SELECT
button again to set the next point, i.e. Point B. After that,
the system will perform a section repeat play, that is, repeat from A to B.
The values of Play Mode Control Item are as follows. The values may vary for different discs.
1. Normal Play. 4. Title Repeat 7. DIR Repeat
2. A-B Repeat 5. Disc Repeat 8. Program Repeat
3. Chapter Repeat 6. Track Repeat 9. Random Repeat
Repeat Play
Play Mode
29
Enter the Title before Playing
1. This function is only available with DVD discs.
Press the
MENU
button, and the title directories will
appear on the screen.
2. Press the arrow buttons to move the cursor to a desired
title. For some discs, you can input numbers to select a title
directly. For example, to select Title 2, press 2; to select Title
20, press 20.
3. Press the
SELECT
button to play the selected title.
Play Mode
2. For DVD disc s, press the a rrow butto ns to sel ect a c hapt er; f or SVCD and VCD 2.0 discs, press the number
buttons to select a track.
The
SELECT
button must be pressed before playing for some discs.
3. Press the
RETURN
button during playing.
For SVCD and VCD 2.0 discs, system will return to menu while PBC is on; the function will not be available
while PBC is off.
The Menu Picture of the DVD disc will be displayed on the TV screen.
For SVCD and VCD discs, this button realizes PBC ON/OFF function.
This function realizes only in the Pre-stop status for some discs.
1. Press the
MENU
button.
Enter Menu before Playing
End Play
1.Press the
STOP
button;
The system will change to the Pre-stop status.
In the Pre-stop status, the unit will automatically record the stopping time. Now if you press the
PLAY or
RETURN
button, the unit will resume playing from the recorded stopping time. (For MUSIC discs, the playing
will start from the beginning of the track at pre-stop time.) Press the
STOP
button again, the system will change
to Stop status and the memory will be cleared then.
2.Press the
button to open the disc tray.
3.Take out the disc.
4.Press the
button to close the disc tray.
5.Press the
button to standby the unit.
EJECT
EJECT
EJECT
Some DVD discs might not have any tltle directory. For such discs, it is no use pressing the “SELECT” button.
Note:
Title directories of different DVD discs may vary to som e e xte nt.