Yamaha BANSHEE YFZ350S Owner's Manual - page 147
of
172
8-44
4. Put a new headlight bulb into position and
secure it in place with the bulb holder.
5. Install the bulb holder cover.
c
C
Make sure the bulb holder cover is secure-
ly fitted over the bulb holder and seated
against the reflector.
6. Install the headlight unit assembly.
7. Adjust the headlight beam if necessary.
EBU01089
Headlight beam adjustment
c
C
It is advisable to have a Yamaha dealer
make this adjustment.
To raise the beam, turn the adjusting screw in
direction
a.
To lower the beam, turn the adjusting screw in
direction
b.
1. Adjusting screw
a
b
1
e
q
w
1. Bulb holder cover
2. Bulb holder
3. Reflector
5FK-9-16-03 3/13/03 8:39 AM Page 45