Yamaha BANSHEE YFZ350S Owner's Manual - page 37
of
172
NOTE:
A special wrench can be obtained at a
Yamaha dealer.
3. The length of the spring (installed)
changes 1.5 mm (0.06 in) per one turn of
the adjusting nut.
4. Tighten the locknut to the specified
torque.
c
C
Always tighten the locknut against the
adjusting nut and tighten it to the specified
torque.
A
Tightening torque:
54 Nm (5.4 m
0kgf, 39 ft0lbf)
Installed length:
Measurement “A”
Minimum (hard):
213.5 mm (8.4 in)
Standard:
220.5 mm (8.7 in)
Maximum (soft):
228.5 mm (9.0 in)
A. Spring length
4-15
5FK-9-16-01 3/13/03 11:13 AM Page 35