Yamaha ClickStation Owner's Manual - Nomenclature
13
Nomenclature
■ Front Panel
q Display
w Beat Volume
e Vibration Volume (VIB.)
r Volume (VOL.)
t Vibrator (VIBRATION)
y Speaker
u Beat Indicators
i Control Buttons
o Start/Stop Switch (also used as Tap Switch)
!0 Tempo Dial (TEMPO)
!1 Back Light Switch
(auto off or continuous operation available,
refer to page 18)
■ Side Panel
!2 Headphones Jacks x2 (PHONES)
!3 Power Switch (POWER ON/OFF)
!4 MIDI IN jack (MIDI IN)
■ Rear Panel
!5 External Device Input Jack (AUX IN)
!6 Trigger Input Jack (TRIGGER IN)
!7 Holder Attachment
!8 Power Adaptor Jack (DC IN 9V)
B o t h s t a n d a r d
phone and mini
jacks can be used
simultaneously.
MIDI device
DTX pad, etc.
CD player, etc.
AC adaptor (optional)
■ Attaching the Holder
Attaching the supplied tilt angle lets you set the
CLICKSTATION at an angle on top of a desk, etc.,
for use.
Refer to the “Attach-
ing the Holder” section
described below.
Tilt Angle (supplied)
Wing Bolt (supplied)
Also, the CLICKSTATION can be attached to a
mic stand, cymbal stand, cowbell holder, etc.,
using the optional mount adaptor or mic stand
adaptor.