Yamaha CRW-70 Owner's Manual - page 31

Using the CRW-70 Drive as a CD-R/RW Drive (When Connected to a Computer)

22

For Windows Me/2000 Professional/XP

Windows Me, 2000 Professional or XP automatically installs the standard 

device drivers.

The device driver needs to be installed for each USB port. If you connect the CRW-

70 drive to a USB port for which the device driver has not yet been installed, a 

message will appear prompting you to install the device driver again.

After connecting the CRW-70 drive to your computer, check to be sure that 

the drive is correctly recognized by the operating system.

For Windows 98 Second Edition/Me

Click Start on the taskbar, select Setting, Control Panel and System, and 

click the Device Manager tab to open the Device Manager window.

For Windows Me, if the System icon is not found in the Control Panel window, 

click “view all Control Panel options” on the left side of the window.

* These screens are examples on Windows Me.

Make sure that “YAMAHA CRW-70” (Screen 1), “USB CD-ROM,” and 

“USB Mass Storage Device” (Screen 2) are displayed as shown above.

Note

STEP 

3 Make Sure that the CRW-70 Drive Is Correctly Recognized

Note

Screen 1

Screen 2 (Scroll down the list)