Yamaha CRW-70 Owner's Manual - page 33

Using the CRW-70 Drive as a CD-R/RW Drive (When Connected to a Computer)

24

Install the CD writing software that came with the CRW-70 drive.

For details about how to install and use the software, refer to the 

documentation that came with it.

The CRW-70 drive can be connected to or disconnected from your computer 

even when the computer is turned on (hot plug).

When removing the CRW-70 drive with the computer turned on, or when 

turning off the drive with the computer connected, follow the steps below.

1

11

1

Exit the CD writing software, if it is running.

2

22

2

Be sure to remove the disc from the drive, if a disc is loaded.

3

33

3

With Windows 98 Second Edition, you can disconnect the drive.

With Windows Me/2000 Professional or Windows XP, start 

“Unplug or Eject Hardware” or “Safety Remove Hardware” on 

the taskbar, respectively, and then perform the necessary steps to 

disconnect the drive.

* This screen is an example on Windows Me.

When writing, be sure not to disconnect the USB cable from the CRW-70 drive, or to 

disconnect or connect any USB devices from/to the computer.

STEP 

4 Install the CD Writing Software

Disconnecting the CRW-70 Drive

Note