Yamaha CRW-70 Owner's Manual - page 46
37
The error message “Buffer Underrun” is displayed.
●
●
●
● If your CD writing software supports Buffer Underrun Protection,
you must activate it.
For more details, refer to the documentation that came with your CD
writing software. (The CD writing software that came with the CRW-70
drive supports Buffer Underrun Protection.)
●
●
●
● To prevent the occurrence of a buffer underrun and to increase the
efficiency of data writing, try the following:
•
Reduce the data writing speed.
•
Create an image file on the hard drive.
•
Optimize the hard drive. (Defragmentation)
•
Do not start any application software (including screen savers) during
data writing.
•
Deactivate the power management for the hard drive.
•
Select “DMA” for the data transfer mode of IDE devices such as hard
drives or CD-ROM drives.
•
Deactivate the Windows Active Desktop.
•
Exit all memory-resident software programs.
•
Check your CD writing software against the documentation that came
with it to be sure that there is no problem with it.
• When the CRW-70 drive is connected to a USB 1.1-compliant port on your
computer, it operates in accordance with USB 1.1 standard. For CD writing
software settings, it is advisable to activate Buffer Underrun Protection and to set
the data writing speed to 8X. (
→P. 10)
• A writing error can occur if vibration is applied to the drive while data is being
written on the CD-R or CD-RW in it.
Notes