Yamaha DJX Owner's Manual - Exit The Function Mode.

30

Function Parameters — Dual Voice

The Function parameters provide all settings for the Dual voice.  Like the similar settings in the Main

Voice mode, these settings let you change or enhance the sound of the Dual voice separate from the

Main voice.  These settings include:

• Volume

• Octave

• Pan

• Reverb Send Level

• Chorus Send Level

• DSP Effect Send Level

Function Parameters

No.

Parameter Name

Display Name

Range/Settings

F11

Dual Voice Volume

D.Volume

0 — 127

F12

Dual Voice Octave

D.Octave

-2 — 2 (octaves)

F13

Dual Voice Pan

D.Pan

-7 (full left) —

0 (center) —

7 (full right)

F14

Dual Voice Reverb

D.RevLvl

0 — 127

Send Level

F15

Dual Voice Chorus

D.ChoLvl

0 — 127

Send Level

F16

Dual Voice DSP

D.DspLvl

0 — 127

Effect Send Level

F17

Dual Voice

D.Voice

0 — 284

F18

Dual On/Off

Dual

on, off

Description

This determines the volume of the Dual voice, letting

you create an optimum mix with the Main voice.

This determines the octave range for the Dual voice.

Use this to create an octave layer with the Main voice.

This determines the pan position of the Dual voice in

the stereo image.  For a spacious sounding effect, set

this value at or near -7, and set the Main Voice Pan

(page 27) at the opposite positive value.

This determines how much of the Dual voice’s signal is

sent to the Reverb effect.  (See page 34.)  Higher values

result in a louder Reverb effect for the Dual voice.

This determines how much of the Dual voice’s signal is

sent to the Chorus effect.  (See page 35.)  Higher values

result in a louder Chorus effect for the Dual voice.

This determines how much of the Dual voice’s signal is

sent to the DSP effect.  (See page 36.)  Higher values

result in a louder DSP effect for the Dual voice.

This determines the Dual voice.  (See list on page 104.)

This turns the Dual Voice mode on/off.  (This is the

same function as that of the DUAL button.  It can also

be controlled by a connected footswitch; see page 21.)

• Dual Voice

• Dual On/Off

PLAYING VOICES — THE VOICE MODE

2

Select the desired Dual voice and make other set-

tings for the voice (if desired) in the Function mode.

Selecting and changing the Function parameters:

Press the FUNCTION button, then use the numeric keypad to select the

parameter number.  After “FUNCTION” stops flashing, use the numeric

keypad or +/- buttons to change the setting.   (For details, see page 18.)

• For the Dual voice to be

heard properly, make sure

to:

* Select a different voice

(#17, Dual Voice).

* Set the volume to an

appropriate level (#11, Dual

Volume).

These settings are not saved

when you turn off the

power.  If you wish to save

them, save them to a User

bank in the Performance

Setup feature (page 56).

3

Exit the Function mode.

Once you’ve made all desired settings, press one of the other mode but-

tons (SONG, STYLE, or VOICE).