Yamaha DJX Owner's Manual - Start Recording.

83

5

Start recording.

When the “RECORD“ indication stops flashing and the beat bars and track

number start flashing, you can start recording simply by playing the key-

board (or by pressing the START/STOP button).

Recording to the Chord Track

A special Chord track is provided for recording pattern data.  This is

automatically recorded to the Chord track (track 6).  To select the

Chord track and turn on the Pattern Control, press the PATTERN

CONTROL button.

You can also simultaneously record one of the melody tracks (1 - 5)

and the Chord track (6).

SONG RECORDING

If Pattern Control has

already been turned on

before entering the Record

mode, the Chord track is

automatically selected.

If you want to rehearse your part before recording, press the SYNC-START

button to turn Sync-Start off.  After rehearsing, press SYNC-START again to

return to the above condition.

If you wish to cancel recording at this point, press the RECORD button

again.

This function can also be

controlled by using a

connected footswitch.  (See

page 21.)

004

RECORD

SONG

User

1

1

Indicates Record

standby.

Flashing beat bars

indicate Sync-Start is on.

When recording the Chord track

With Sync-Start on, play the first chord of the song in the Pattern

section of the keyboard.  The pattern starts automatically and you

can continue recording, playing other chords in time with the pat-

tern.

6

Stop recording.

After you’ve finished playing the part, press the START/STOP button.

Pattern Section

Performance Section

001 142

MEASURE

1

CHORD