Yamaha EF1000iS Owner's Manual - page 22

AE01100

Battery Charging

NOTE:

The generator DC rated voltage is 12V.

1. Wind the battery charging lead 2 or 3 turns around

the handle and plug into DC receptacle.

NOTE:

9 Make connections to the battery after starting the

engine.

9 Clamp the red wire to the positive (+) terminal and

the black wire to the negative (-) terminal of the

battery. Do not reverse these positions.

1 Red

2 Black

2. Start the engine.

3. Press in the DC protector and install the battery.

c

C

9 Be sure the economy control switch is turned

off while charging the battery.

9 Be sure the battery leads are properly con-

nected.

9 Be sure the breather hose is properly connect-

ed and is not damaged or obstructed.

9 Reduce the load to the specified generator

rated output if the DC protector turns off. If it

turns off again, consult a Yamaha dealer.

NOTE:

Press to reset the DC protector.

1 “RESET”

2 “OFF”

NOTE:

9 At full charge, electrolyte specific gravity is

between 1.26 and 1.28.

9 Check specific gravity hourly.

– 17 –

761-079a

762-040

1

2

6v

6v

12v

762-041

763-238a

q

w

 7CG-28199-10  4/1/04 3:13 PM  Page 17