- DL manuals
- Yamaha
- Portable Generator
- EF6300iSDE
- Owner's Manual
Yamaha EF6300iSDE Owner's Manual
Summary of EF6300iSDE
Page 1
Generator 7ck-28199-10 ef6300isde owner’s manual please read and understand this manual completely before operating the machine. Lit-19626-01-52 printed on recycled paper printed in japan 2008 9 09 – 1.0 × 1 ! 7ck-28199-10_hyoshi 08.8.30 14:27 page 1.
Page 2
7ck-28199-10_hyoshi 08.8.30 14:27 page 2.
Page 3: Introduction
Ae00002 introduction congratulations on your purchase of your new yamaha. This manual will provide you with a good basic understanding of the operation and maintenance of this machine. If you have any questions regarding the operation or maintenance of your machine, please consult a yamaha dealer. E...
Page 4: Impotant Manual Information
Particularly important information is distin- guished in this manual by the following notations. - the safety alert symbol means atten- tion! Become alert! Your safety is involved! W failure to follow warning instructions could result in severe injury or death to the engine operator, a bystander or ...
Page 5: Contents
Ae00041 contents safety information ........................1 exhaust fumes are poisonous........................................1 fuel is highly flammable and poisonous........................................1 engine and muffler may be hot ......................................................1 ele...
Page 6: Safety Information
– 1 – 741-7xfa 741-7xfb 741-7xfc 741-7xfd 741-7xfe 741-7xff ae00071 safety information ae00072 exhaust fumes are poisonous 9 never operate the engine in a closed area or it may cause unconsciousness and death within a short time. Operate the engine in a well ventilated area. Ae00075 fuel is highly f...
Page 7: Electric Shock Prevention
– 2 – 741-7xfg a 741-7xfh 1 1 1 794-7ck 741-7xfi 741-7xfj 9 keep the machine at least 1 m (3 ft) from buildings or other equipment, or the engine may overheat. A 1 m (3 ft) 9 avoid operating the engine with a dust cover. 9 be sure to carry the generator only by its carrying handles 1. Ae00083 electr...
Page 8: Connection Notes
– 3 – 1 2 1 2 741-7xfk ae00088 connection notes 9 avoid connecting the generator to commercial power outlet. 9 avoid connecting the generator in parallel with any other generator. 1 correct 2 incorrect ae00091 connection w before the generator can be connected to a build- ing’s electrical system, a ...
Page 9: Location of Important Labels
– 4 – ae00062 location of important labels please read the following labels carefully before oper- ating this machine. Note: maintain or replace safety and instruction labels, as necessary. 1 danger using a generator indoors can kill you in minutes. Generator exhaust contains carbon monoxide. This i...
Page 10: Warning
– 5 – 4 6 3 7 warning read the owner‘s manual and all labels before operating. Q q avertissement 8 only operate in well-ventilated areas. Exhaust gas contains poisonous carbon monoxide. Check for spilled fuel or fuel leaks. Stop engine before refueling. Do not operate near flammable materials. Elect...
Page 11: Description
– 6 – description ae00102 1 carrying handles (shaded) 2 fuel tank cap 3 fuel gauge 4 muffler 5 caster lock lever 6 oil filler cap 7 oil drain bolt 8 battery ae00103 control panel 1 hour meter 2 power meter 3 g.F.C.I. Receptacle 4 ac protector 5 ac receptacle 6 engine switch 7 fuel cock knob 8 voltag...
Page 12: Oil Warning Light (Red)
763-119 q w e – 7 – 700-7xf ae00111 oil warning light (red) when the oil level falls below the lower level, the oil warning light comes on and then the engine stops automatically. Unless you refill with oil, the engine will not start again. Note: if the engine stalls or does not start, turn the engi...
Page 13: Ac Protector
– 8 – 1 4 2 3 793-7cke ae00134 ac protector the ac protector 1 trips when total amount of the receptacles 2 loads exceed 20a. The ac protector 3 trips when the receptacle 4 loads exceed 30a. Press the switches to reset the ac protectors. 1 i “set” 2 3 “reset” 763-238a 1 2 ae00142 economy control swi...
Page 14: G.F.C.I. Receptacle
– 9 – test reset reset test w q 763-083c e 763-060 ae00848 g.F.C.I. Receptacle w to reduce the chance of electrical shock: 9 do not attempt to operate electric devices if the ground fault circuit interrupter reset button pops out repeatedly during use. 9 test the ground fault circuit interrupter dur...
Page 15: Hour Meter
– 10 – 1 763-7ckf 1 763-7ckg 1 763-7ckc hour meter the hour meter 1 shows the total number of hours the generator has been run. Power meter the power meter 1 shows the amount of electric cur- rent used by a barmeter. The generator output is normal when the segments of the barmeter appear. Note: when...
Page 16: Fuel Tank Cap
– 11 – ae01087 overload indicator light (red) the overload indicator light 1 comes on when an overload of a connected electrical device is detected, the inverter control unit overheats, or the ac output voltage rises. Then, the ac protector will trip, stopping power generation in order to protect th...
Page 17: Fuel Cock Knob
– 12 – 763-7ckb on off 1 2 705-073d 1 763-7cka fuel cock knob the fuel cock supplies fuel from the fuel tank to the carburetor. The fuel cock has two positions. 1 “ on” with the knob in this position, fuel flows to the carbure- tor. Normal using is done with the knob in this position. 2 “ off” with ...
Page 18: Preparation
– 13 – 741-7xfl 1 2 707-7xf 707-7xfc 3 4 707-7xfa preparation ae00856 fuel w 9 fuel is highly flammable and poisonous. Check “safety information” (see page 1) carefully before filling. 9 do not overfill the fuel tank, otherwise it may overflow when the fuel warms up and expands. 9 after fill the fue...
Page 19: Engine Oil
– 14 – – 14 – 3 700-7xfa 700-103c r 0 °c å yamalube 4 (10w-40) ∂ sae 10w ç sae #20 ∫ sae #30 32 °f 25 °c 80 °f 700-006 ae00222 engine oil c c the generator has been shipped without engine oil. Do not start the engine till fill with the suffi- cient engine oil. 1. Place the generator on a level surfa...
Page 20: Battery Preparation
– 15 – ae01083 battery preparation (see page 34) w 9 electrolyte is poisonous and dangerous since it contains sulfuric acid, which causes severe burns. Avoid any contact with skin, eyes or clothing and always shield your eyes when working near batteries. In case of contact, administer the following ...
Page 21
– 16 – 8. Connect the negative lead (black) 8 to the nega- tive (-) battery terminal 9. 9. Install the rear cover and tighten the bolts. 9 762-7ckd 8 7ck-28199-10_a 08.9.15 17:47 page 16.
Page 22: Pre-Operation Check
– 17 – ae00845 pre-operation check w if any item in the pre-operation check is not work- ing properly, have it inspected and repaired before operating the generator. The condition of a generator is the owner's responsibil- ity. Vital components can start to deteriorate quickly and unexpectedly, even...
Page 23: Operation
– 18 – 761-7ckb 705-073 on off q ae00846 operation w 9 never operate the engine in a closed area or it may cause unconsciousness and death within a short time. Operate the engine in a well ven- tilated area. 9 before starting the engine, do not connect any electric devices. C c the generator has bee...
Page 24
– 19 – 763-120a q 3. Turn the engine switch to “start”. Take your hand off the switch immediately after the engine starts. 1 6 “start” c c if the engine fails to start, release the switch, wait a few seconds, then try again. Each attempt should be as short as possible to preserve the bat- tery. Do n...
Page 25: Stopping The Engine
– 20 – 761-7ckb 763-120b q 705-073a on off q 4. Turn the fuel cock knob to “off”. 1 “off” ae00840 stopping the engine 1. Turn off any electric devices. 2. Disconnect any electric devices. 3. Turn the engine switch to “stop”. 1 5 “stop” 7ck-28199-10_a 08.9.15 17:47 page 20
Page 26: Connection
– 21 – ae00839 connection alternating current (ac) w be sure any electric devices are turned off before plugging them in. C c 9 be sure all electric devices including the lines and plug connections are in good condition before connection to the generator. 9 be sure the total load is within generator...
Page 27
– 22 – 763-124c on off 1 econ.Sw a 4. Make sure the ac pilot light 1 is on. 5. Turn the economy control switch to “on” 1 i “on” å economy control switch 6. Turn on any electric devises. Note: the economy control switch must be turned to “off” to increase engine speed to rated rpm. 1 763-7ckc 7ck-281...
Page 28: Application Range
– 23 – ae00812 application range when using the generator, make sure the total load is within rated output of a generator. Otherwise, generator damage may occur. Ac power factor 1 0.8 ~ 0.95 0.4 ~ 0.75 (efficiency 0.85) ef6300isde – 5,500w – 4,400w – 1,870w note: 9 “–” means below. 9 application wat...
Page 29: — Memo —
– 24 – — memo — 7ck-28199-10_a 08.9.15 17:47 page 24.
Page 30: Periodic Maintenance
– 25 – ae00401 periodic maintenance safety is an obligation of the owner. Periodic inspection, adjustment and lubrication will keep your generator in the safest and most efficient condition possible. The most impor- tant points of generator inspection, adjustment, and lubrication are explained on th...
Page 31
– 26 – *1····· initial replacement of the engine oil is after one month or 20 hours of operation. *2····· the air filter element needs to be cleaned more frequently when using in unusually wet or dusty areas. ★····· since these items require special tools, data and technical skills, have a yamaha de...
Page 32: Spark Plug Inspection
4. Check the spark plug type and gap a. Note: the spark plug gap should be measured with a wire thickness gauge and, if necessary, adjusted to specifi- cation. 5. Install the spark plug. Note: if a torque wrench is not available when installing a spark plug, a good estimate of the correct torque is ...
Page 33: Engine Oil Replacement
3. Remove the rubber cap 3, rubber plug 4 and the oil filler cap 5. 4. Place an oil pan under the engine. Remove the oil drain bolt 6 so that the oil can be completely drained. 5. Check the oil drain bolt, gasket 7, oil filler cap and o-ring 8. If damaged, replace. 6. Reinstall the oil drain bolt. 1...
Page 34: Air Filter
– 29 – c c be sure no foreign material enters the crankcase. 8. Install the oil filler cap, the rubber cap and the rub- ber plug. 9. Install the front cover and tighten the bolts. Ae01084 air filter 1. Remove the bolts 1, and then pull outward on the areas of front cover 2 shown. 2. Remove the bolts...
Page 35
– 30 – 3. Remove the air filter cover 1 and foam element 2. 4. Wash the foam element in solvent and dry it. 5. Oil the foam element and squeeze out excess oil. The foam element should be wet but not dripping. C c do not wring out the foam element when squeez- ing it. This could cause it to tear. 6. ...
Page 36
– 31 – 741-7xfl 1 2 788-7ckb 1 2 3 711-7xfa 711-7xfb 4 711-7xfc ae01075 muffler screen and spark arrester w the engine and muffler will be very hot after the engine has been run. Avoid touching the engine and muffler while they are still hot with any part of your body or clothing during inspection o...
Page 37
– 32 – 2 1 711-7xfd 711-7xfe 6. Install the muffler screen and the muffler cap. 7. Install the rear cover and tighten the bolts. 3. Remove the carbon deposits on the muffler screen and spark arrester using a wire brush. C c when cleaning, use the wire brush lightly to avoid damaging or scratching of...
Page 38: Fuel Tank Filter
– 33 – 707-043b q ae00471 fuel tank filter w never use or be near the fuel and solvent while smoking or in the vicinity of an open flame. 1. Remove the fuel tank cap and filter 1. 2. Clean the filter with gasoline. If damaged, replace it. 3. Wipe the filter and install it. 4. Install the fuel tank c...
Page 39: Battery
– 34 – 762-012 ae00842 battery this generator is equipped with a sealed type (mf) battery, which does not require any maintenance. There is no need to check the electrolyte or to add dis- tilled water. W 9 electrolyte is poisonous and dangerous since it contains sulfuric acid, which causes severe bu...
Page 40: Fuse Replacement
2. Replace the fuse with one of proper amperage. Note: if the fuse immediately blows again, consult a yamaha dealer. 3. Install the front cover and tighten the bolts. – 35 – 1 2 788-7cka 779-7xf ae01077 fuse replacement w be sure to use specified fuse. A wrong fuse will cause electrical system damag...
Page 41: G.F.C.I. Receptacle Test
– 36 – test reset reset test q w 763-083b e r 763-059 ae00501 g.F.C.I. Receptacle test 1. Start the engine. 2. Press the test button 1, then check the position of the reset button 2. 3. If g.F.C.I. Operation is correct, push in the reset button. If the g.F.C.I. Operates incorrectly, consult a yamaha...
Page 42: Storage
– 37 – ae00601 storage long term storage of your machine will require some preventive procedures to guard against deterioration. 763-120b q 707-7ck 705-073b on off ae01056 drain the fuel 1. Turn the engine switch to “stop” 1. 2. Remove the fuel tank cap. Extract the fuel from the fuel tank into an a...
Page 43
– 38 – 6. Remove the bolts 1, and then pull outward on the areas of front cover 2 shown. 7. Drain the fuel from the carburetor by loosening the drain screw 1 on the carburetor float chamber. 8. Turn the engine switch to “off”. 9. Turn the fuel cock knob to “off”. 10. Tighten the drain screw. 11. Ins...
Page 44: Engine
– 39 – ae00889 engine perform the following steps to protect the cylinder, pis- ton ring, etc. From corrosion. 1. Remove the spark plug cap and spark plug, pour about one tablespoon of sae 10w30 or 20w40 motor oil into spark plug hole and reinstall the spark plug only. 2. Turn the engine switch to “...
Page 45: Battery
– 40 – 762-003 ae01086 battery 1. Remove the battery. 2. Store the battery in a cool, dark and dry place. Do not store the battery in an excessively warm or cold place [i.E., less than 0°c (30°f) or more than 30°c (90°f)]. W 9 disconnect the negative lead (black) first, then the positive lead (red) ...
Page 46: — Memo —
– 41 – — memo — 7ck-28199-10_b 08.9.15 17:13 page 41.
Page 47: Troubleshooting
– 42 – 707-7xfc 705-073 on off q 700-006 760-009 ae00512 troubleshooting engine won’t start 1. Fuel systems no fuel supplied to combustion chamber. 2 no fuel in tank .... Supply fuel. 2 fuel in tank .... Fuel cock knob to “on” 1. 2 clogged fuel line .... Clean fuel line. 2 clogged carburetor .... Cl...
Page 48
– 43 – ae00515 generator won’t produce power • safety device (ac protector) to “reset”····press the ac protector to “set”. • the voltage select switch in the wrong position····turn the voltage select switch to the right position. A engine does not start b turn the engine switch to “on”, then turn th...
Page 49
– 44 – faulty battery and/or starter motor. Consult a yamaha dealer. E i check engine oil level. J ok k level low consult a yamaha dealer. Add engine oil. O check the spark plug. 9 type: 9 gap: p incorrect q ok replace or adjust gap. Clean the spark plug. 7ck-28199-10_b 08.9.15 17:13 page 44.
Page 50: Specifications
– 45 – unit ef6300isde type air cooled 4-stroke gasoline ohv cylinder arrangement inclined, 1 cylinder displacement cm 3 357 bore × stroke mm (in) 85.0 × 63.0 (3.35 × 2.48) operation hours hr 5.1–13.3 (rated load–1/4 load) fuel unleaded gasoline fuel tank capacity l (us gal, imp gal) 17.0 (4.49, 3.7...
Page 51: Consumer Information
– 46 – ae00012 identification number records record your primary i.D., and serial num- bers in the spaces provided, to assist you in ordering spare parts from a yamaha dealer. Also record and keep these i.D. Numbers in a separate place in case your machine is stolen. Pri-i.D. Number: pri-i.D. Code s...
Page 52
– 47 – yamaha motor corporation, u.S.A. Hereby war- rants that new yamaha consumer generators pur- chased from an authorized yamaha consumer generator dealer in the continental united states will be free from defects in material and workman- ship for the period of time stated herein, subject to cert...
Page 53
– 48 – warranty questions and answers q. What costs are my responsibility during the warranty period? A. The customer’s responsibility includes all costs of normal maintenance service, non- warranty repairs, accident damages, as well as oil and spark plugs. Q. What are some examples of “abnormal” st...
Page 54: Item
– 49 – ae00789 exhaust emission control system and components item acronym 9 carb. Assy., lh. & jt., ......................Carb (carburetor) carburetor2 9 t.C.I. Magneto assy. & .....................Ei (electronic ignition) plug, spark 9 crankcase1 & head, .......................Pcv (positive crankc...
Page 55: — Memo —
– 50 – — memo — 7ck-28199-10_b 08.9.15 17:13 page 50
Page 56: Wiring Dia
– 51 – m yr b /w l/r r/w r/b b off on start r r b b g/w b/r r/w or/w y/w r y y y y yy y g l or g/w b/r l/y l/r l/w y/w r/w l/w or/w r r br or l g p y or l gp y br or l yg or br lg y r y g b p b p br r r b y br l y y y y r/y b/y g or r l y g or l/w g/w r/w or/w y/w l/w l l or w w ww w w w y y y yy y ...
Page 57
– 52 – 1 main coil 1 2 control unit (slave) 3 ac pilot light 4 voltage select switch 5 ac protector (breaker) 6 g.F.C.I. Receptacle 7 ac receptacle 8 hour meter/power meter 9 engine switch 0 diode assembly q rectifier/regulator w economy control switch e overload indicator light r ground (earth) ter...
Page 58: — Memo —
– 53 – — memo — 7ck-28199-10_b 08.9.15 17:13 page 53.
Page 59
7ck-28199-10_hyoshi 08.8.30 14:27 page 2.
Page 60: 7Ck-28199-10
Generator 7ck-28199-10 ef6300isde owner’s manual please read and understand this manual completely before operating the machine. Lit-19626-01-52 printed on recycled paper printed in japan 2008 9 09 – 1.0 × 1 ! 7ck-28199-10_hyoshi 08.8.30 14:27 page 1.