Yamaha EK25BMH Service Manual - Control System

CONTROL SYSTEM

3-10

E

CHK

ADJ

5. Adjusting the throttle cable

• Throttle cable

Adjusting steps

NOTE:

After adjustment, open and close the throt-

tle for several times for reassurance.

(1) Set the shift lever 

 in forward posi-

tion.

(2) Move the throttle 

 to full-open posi-

tion.

(3) Check that the magnet base stopper 

is in contact with the stopper on the

engine body (full-open end stopper) 

.

(4) If the stoppers come in contact before

the throttle is fully open, loosen the lock

nut 

 on the throttle-opening cable,

turn-in the adjusting nut 

 until the

cerrect positioning is attained, and then

secure it by the lock nut 

.

(5) If the stoppers do not come in contact

at full-open throttle, then turn-out the

adjusting nut 

 on the throttle-opening

cable until the correct positioning is

attained, and secure it by the lock nut

.

4

3

1

2

3

4

6

5

6

5

6