Yamaha EK25BMH Service Manual - Control System
Manual is about: Outboard Motor Yamaha EK25BMH
of
230
CONTROL SYSTEM
CHK
ADJ
3-11
E
(6) After confirming the positive contact of
stoppers at full-open throttle position,
turn the adjusting nut
on the throt-
tle-closing cable so that the cable has a
little slack, and then secure it by the lock
nut .
(7) Once the adjustment under full-open
throttle is completed, move the throttle
to full-close position.
(8) Make sure that the magnet base stop-
per
is in contact with the stopper on
the engine body (full-close end stopper)
.
(9) Move the throttle
to full-open posi-
tion.
(10) In this condition, make sure that the
full-open stopper is in contact with the
stopper.
NOTE:
If they are not in contact, adjust the carbu-
retor control link.
Refer to "Adjusting the carburetor control
link:" on page 3-7.
3
4
7
8
2
3
4
2