Yamaha EK25BMH Service Manual - Recoil Starter
Manual is about: Outboard Motor Yamaha EK25BMH
of
230
RECOIL STARTER
5-7
E
POWR
2. Install:
•
Starter rope
•
Sheave drum
NOTE:
• Insert the rope through the rope hole
and knot the end as shown.
• Wind the rope 1-1/2 turns counterclock-
wise onto the sheave drum.
• Place the rope at the cutaway
.
WARNING
• Do not use a damaged starter rope, it
could cause injury.
3. Install:
•
Bushing
NOTE:
Mount the bushing on the starter case shaft.
4. Install:
•
Sheave drum
NOTE:
While turning the sheave drum, fit the
sheave drum shaft slot into the spiral spring
hook, and then place the sheave drum shaft
into the starter case boss.
5. Install:
•
Return spring
•
Drive pawl
NOTE:
Hook the end of the return spring onto the
drive pawl, and check to see that the drive
pawl returns smoothly.
1
1
2
1
2
3
1
1
1
2