Summary of FJR1300A

  • Page 1

    Dic183 fjr1300-a fjr1300a owner’s manual b88-28199-e0 motorcycle [english (e)] read this manual carefully before oper- ating this vehicle..

  • Page 2

    Eau69311 rea d this manual carefully b efore operatin g this vehicle. This manual shoul d stay with this vehicle if it is sol d . Date of issue: signature of responsible person: january 12, 2015 product: immobilizer model: 1mc-00 supplied by yamaha motor electronics co.,ltd. 1450-6 mori, mori-machi ...

  • Page 3: Intro

    Intro d uction eau10103 welcome to the yamaha world of motorcycling! As the owner of the fjr1300-a, you are benefiting from yamaha’s vast experi- ence and newest technology regarding the design and manufacture of high-qual- ity products, which have earned yamaha a reputation for dependability. Pleas...

  • Page 4: Important Manual Information

    Important manual information eau63350 particularly important information is distinguished in this manual by the following notations: *product and specifications are subject to change without notice. Eau10201 this is the safety alert sym b ol. It is use d to alert you to potential personal injury haz...

  • Page 5: Le of Contents

    Ta b le of contents safety information ............................1-1 description ........................................2-1 left view ..........................................2-1 right view........................................2-2 controls and instruments................2-3 instrument an d con...

  • Page 6: Le of Contents

    Ta b le of contents checking and lubricating the throttle grip and cable............... 6-28 checking and lubricating the brake and shift pedals............... 6-28 checking and lubricating the brake and clutch levers ............. 6-29 checking and lubricating the centerstand and sidestand ....... ...

  • Page 7: Safety Information

    1-1 1 safety information eau1028b be a responsible owner as the vehicle’s owner, you are re- sponsible for the safe and proper oper- ation of your motorcycle. Motorcycles are single-track vehicles. Their safe use and operation are de- pendent upon the use of proper riding techniques as well as the e...

  • Page 8: Safety Information

    Safety information 1-2 1 many accidents involve inexperi- enced operators. In fact, many op- erators who have been involved in accidents do not even have a cur- rent motorcycle license. • make sure that you are qualified and that you only lend your mo- torcycle to other qualified oper- ators. • know...

  • Page 9: Safety Information

    Safety information 1-3 1 avoi d car b on monoxi d e poisonin g all engine exhaust contains carbon monoxide, a deadly gas. Breathing carbon monoxide can cause head- aches, dizziness, drowsiness, nausea, confusion, and eventually death. Carbon monoxide is a colorless, odor- less, tasteless gas which m...

  • Page 10: Safety Information

    Safety information 1-4 1 sleeping bags, duffel bags, or tents, can create unstable han- dling or a slow steering re- sponse. This vehicle is not d esi g ne d to pull a trailer or to b e attache d to a si d ecar. Genuine yamaha accessories choosing accessories for your vehicle is an important decisio...

  • Page 11: Safety Information

    Safety information 1-5 1 operator and may limit control ability, therefore, such accesso- ries are not recommended. Use caution when adding electri- cal accessories. If electrical ac- cessories exceed the capacity of the motorcycle’s electrical sys- tem, an electric failure could re- sult, which cou...

  • Page 12: Description

    Description 2-1 2 eau63371 left view 1 2 3 4 5 7 6 8 9 10 11 12 13 1. Coolant reservoir (page 6-15) 2. Accessory box (page 3-36) 3. Front fork spring preload adjusting bolt (page 3-40) 4. Owner’s tool kit (page 6-2) 5. Final gear oil filler bolt (page 6-14) 6. Final gear oil drain bolt (page 6-14) 7...

  • Page 13: Description

    Description 2-2 2 eau63391 ri g ht view 8 9 10 11 6,7 5 3,4 2 1 1. Storage compartment (page 3-35) 2. Fuel tank cap (page 3-28) 3. Front fork spring preload adjusting bolt (page 3-40) 4. Front fork rebound damping force adjusting knob (page 3-40) 5. Windshield (page 3-12) 6. Fuses (page 6-34) 7. Bat...

  • Page 14: Description

    Description 2-3 2 eau63401 controls an d instruments 1 2 3 4 5 6 7 8 2 9 10,11 12 11 1. Clutch lever (page 3-24) 2. Rear view mirror (page 3-39) 3. Left handlebar switches (page 3-22) 4. Clutch fluid reservoir (page 6-25) 5. Multi-function meter unit (page 3-10) 6. Main switch/steering lock (page 3-...

  • Page 15: Instrument An

    Instrument an d control functions 3-1 3 eau10978 immo b ilizer system this vehicle is equipped with an immo- bilizer system to help prevent theft by re-registering codes in the standard keys. This system consists of the fol- lowing: a code re-registering key (with a red bow) two standard keys (with ...

  • Page 16: Instrument An

    Instrument an d control functions 3-2 3 keep the stan d ar d keys as well as keys of other immo b ilizer systems away from this vehi- cle’s co d e re-re g isterin g key. Keep other immo b ilizer system keys away from the main switch as they may cause si g nal inter- ference. Eau10474 main switch/ste...

  • Page 17: Instrument An

    Instrument an d control functions 3-3 3 warning ewa10062 never turn the key to “off” or “lock” while the vehicle is movin g . Otherwise the electrical systems will b e switche d off, which may result in loss of control or an acci d ent. Eau10694 lock the steering is locked and all electrical systems...

  • Page 18: Instrument An

    Instrument an d control functions 3-4 3 eau49398 in d icator li g hts an d warnin g li g hts eau11032 turn si g nal in d icator li g hts “ ” an d “ ” each indicator light will flash when its corresponding turn signal lights are flashing. Eau11061 neutral in d icator li g ht “ ” this indicator light ...

  • Page 19: Instrument An

    Instrument an d control functions 3-5 3 eau73171 en g ine trou b le warnin g li g ht “ ” this warning light comes on if a prob- lem is detected in the engine or other vehicle control system. If this occurs, have a yamaha dealer check the on- board diagnostic system. The electrical circuit of the war...

  • Page 20: Instrument An

    Instrument an d control functions 3-6 3 try to reset the traction control system and the lights by following the proce- dures under “resetting” on page 3-28. Eau73120 immo b ilizer system in d icator li g ht “ ” when the key is turned to “off” and 30 seconds have passed, the indicator light will fla...

  • Page 21: Instrument An

    Instrument an d control functions 3-7 3 eau54192 cruise control system this model is equipped with a cruise control system designed to maintain a set cruising speed. The cruise control system operates only when riding in 3rd gear at speeds between about 50 km/h (31 mi/h) and 160 km/h (100 mi/h), 4th...

  • Page 22: Instrument An

    Instrument an d control functions 3-8 3 a d justin g the set cruisin g spee d while the cruise control system is op- erating, push the “res+” side of the cruise control setting switch to in- crease the set cruising speed or the “set–” side to decrease the set speed. Tip pushing the setting switch on...

  • Page 23: Instrument An

    Instrument an d control functions 3-9 3 set cruising speed. You will not be able to use the resume function until a new cruising speed has been set. Automatic deactivation of the cruise control system the cruise control system for this mod- el is electronically controlled and is linked with the othe...

  • Page 24: Instrument An

    Instrument an d control functions 3-10 3 eau54258 multi-function meter unit warning ewa12423 be sure to stop the vehicle b efore makin g any settin g chan g es to the multi-function meter unit. Chan g in g settin g s while ri d in g can d istract the operator an d increase the risk of an acci d ent....

  • Page 25: Instrument An

    Instrument an d control functions 3-11 3 tachometer the electric tachometer allows the rid- er to monitor the engine speed and keep it within the ideal power range. When the key is turned to “on”, the ta- chometer needle sweeps once across the r/min range and then returns to zero r/min in order to t...

  • Page 26: Instrument An

    Instrument an d control functions 3-12 3 transmission g ear d isplay this display shows the selected gear. The neutral position is indicated by “ ” and by the neutral indicator light “ ”. Drive mo d e d isplay this display indicates which drive mode has been selected: touring mode “t” or sports mode...

  • Page 27: Instrument An

    Instrument an d control functions 3-13 3 to increase the grip warmer tempera- ture, push the “ ” side of the select switch. To decrease the grip warmer temperature, push the “ ” side of the select switch. Notice eca17931 be sure to wear g loves when usin g the g rip warmers. If the am b ient tempera...

  • Page 28: Instrument An

    Instrument an d control functions 3-14 3 the tripmeters will reset and con- tinue counting after 9999.9 is reached. When approximately 5.5 l (1.45 us gal, 1.21 imp.Gal) of fuel remains in the fuel tank, the last segment of the fuel meter starts flashing. In addition, the information display will aut...

  • Page 29: 12.3

    Instrument and control functions 3-15 3 tip –9 °c will be displayed even if the ambient temperature falls below –9 °c. 50 °c will be displayed even if the ambient temperature climbs above 50 °c. The accuracy of the temperature reading may be affected when rid- ing under 20 km/h (12 mi/h) or when sto...

  • Page 30: Instrument An

    Instrument an d control functions 3-16 3 notice eca15474 if there is a malfunction, “– –.–” will b e continuously d isplaye d . Have a yamaha d ealer check the vehicle. Instantaneous fuel consumption dis- play: the instantaneous fuel consumption display modes “km/l”, “l/100km” or “mpg” show the fuel...

  • Page 31: Instrument An

    Instrument an d control functions 3-17 3 adjusting the temperature levels of the grip warmer settings 1. Use the select switch to highlight “grip warmer”. 2. Push the “menu” switch. The grip warmer setting display will be shown and “high” will flash in the display. 3. Push the “menu” switch. The tem...

  • Page 32: Instrument An

    Instrument an d control functions 3-18 3 4. Use the select switch to highlight “middle” or “low”, and then change the setting using the same procedure that was used for the high setting. 5. When you are finished changing the settings, use the select switch to highlight “ ”, and then push the “menu” ...

  • Page 33: Instrument An

    Instrument an d control functions 3-19 3 3. While the selected item is flashing, push the “reset” button for 2 seconds. 4. Push the “menu” switch to return to the setting mode menu. Selecting the units 1. Use the select switch to highlight “unit”. 2. Push the “menu” switch. The unit setting display ...

  • Page 34: Instrument An

    Instrument an d control functions 3-20 3 selecting the display items 1. Use the select switch to highlight “display”. 2. Push the “menu” switch, use the select switch to highlight the dis- play to change, and then push the “menu” switch again. 3. Use the select switch to highlight the item to change...

  • Page 35: Instrument An

    Instrument an d control functions 3-21 3 2. Push the “menu” switch. 3. Use the select switch to select the desired brightness level, and then push the “menu” switch to return to the setting mode menu. Setting the clock 1. Use the select switch to highlight “clock”. 2. Push the “menu” switch. 3. When...

  • Page 36: Instrument An

    Instrument an d control functions 3-22 3 eau49432 d-mo d e ( d rive mo d e) d-mode is an electronically controlled engine performance system with two mode selections (touring mode “t” and sports mode “s”). Push the drive mode switch “mode” to switch between modes. (see page 3-23 for an explanation o...

  • Page 37: Instrument An

    Instrument an d control functions 3-23 3 eau12461 turn si g nal switch “ / ” to signal a right-hand turn, push this switch to “ ”. To signal a left-hand turn, push this switch to “ ”. When released, the switch returns to the cen- ter position. To cancel the turn signal lights, push the switch in aft...

  • Page 38: Instrument An

    Instrument an d control functions 3-24 3 eau12832 clutch lever the clutch lever is located on the left side of the handlebar. To disengage the clutch, pull the lever toward the handlebar grip. To engage the clutch, release the lever. The lever should be pulled rapidly and released slowly for smooth ...

  • Page 39: Instrument An

    Instrument an d control functions 3-25 3 eau26825 brake lever the brake lever is located on the right side of the handlebar. To apply the front brake, pull the lever toward the throttle grip. The brake lever is equipped with a brake lever position adjusting dial. To adjust the distance between the b...

  • Page 40: Instrument An

    Instrument an d control functions 3-26 3 eau73181 abs this model’s anti-lock brake system (abs) features a dual electronic control system, which acts on the front and rear brakes independently. Operate the brakes with abs as you would conventional brakes. If the abs is activated, a pulsating sensati...

  • Page 41: Instrument An

    Instrument an d control functions 3-27 3 eau54271 traction control system the traction control system helps maintain traction when accelerating on slippery surfaces, such as unpaved or wet roads. If sensors detect that the rear wheel is starting to slip (uncon- trolled spinning), the traction contro...

  • Page 42: Instrument An

    Instrument an d control functions 3-28 3 resettin g the traction control system will be dis- abled in the following conditions: the rear wheel is rotated with the centerstand down and the key in the “on” position. Either the front wheel or rear wheel comes off the ground while riding. Excessive rear...

  • Page 43: Instrument An

    Instrument an d control functions 3-29 3 eau13222 fuel make sure there is sufficient gasoline in the tank. Warning ewa10882 gasoline an d g asoline vapors are extremely flamma b le. To avoi d fires an d explosions an d to re d uce the risk of injury when refuelin g , follow these instructions. 1. Be...

  • Page 44: Instrument An

    Instrument an d control functions 3-30 3 95 or higher. If knocking (or pinging) occurs, use a gasoline of a different brand or premium unleaded fuel. Use of unleaded fuel will extend spark plug life and reduce maintenance costs. Gasohol there are two types of gasohol: gaso- hol containing ethanol an...

  • Page 45: Instrument An

    Instrument an d control functions 3-31 3 eau13447 catalytic converters this vehicle is equipped with catalytic converters in the exhaust system. Warning ewa10863 the exhaust system is hot after op- eration. To prevent a fire hazar d or b urns: do not park the vehicle near possi b le fire hazar d s s...

  • Page 46: Instrument An

    Instrument an d control functions 3-32 3 ri d er seat to remove the rider seat 1. Remove the passenger seat. 2. Push the rider seat lock lever, lo- cated under the back of the rider seat, to the left as shown, and then pull the seat off. To install the rider seat 1. Insert the projection on the fron...

  • Page 47: Instrument An

    Instrument an d control functions 3-33 3 eau39633 a d justin g the ri d er seat hei g ht the rider seat height can be adjusted to one of two positions to suit the rid- er’s preference. The rider seat height was adjusted to the lower position at delivery. To chan g e the ri d er seat hei g ht to the ...

  • Page 48: Instrument An

    Instrument an d control functions 3-34 3 6. Align the projection on the bottom of the rider seat with the “h” posi- tion slot, and then push the rear of the seat down to lock it in place as shown. 7. Install the passenger seat. To chan g e the ri d er seat hei g ht to the low position 1. Remove the ...

  • Page 49: Instrument An

    Instrument an d control functions 3-35 3 eau40254 stora g e compartments this vehicle is equipped with two stor- age compartments. Storage compartment a is located un- der the rider seat. (see page 3-31.) storage compartment b is located un- der the passenger seat. (see page 3-31.) when storing docu...

  • Page 50: Instrument An

    Instrument an d control functions 3-36 3 eau39482 accessory b ox the accessory box is located beside the meter panel. To open the accessory b ox 1. Insert the key into the main switch, and then turn it to “on”. 2. Push the accessory box button, and then open the accessory box lid. 3. Turn the key to...

  • Page 51: Instrument An

    Instrument an d control functions 3-37 3 eau39612 a d justin g the hea d li g ht b eams the headlight beam adjusting knobs are used to raise or lower the height of the headlight beams. It may be neces- sary to adjust the headlight beams to increase visibility and help prevent blinding oncoming drive...

  • Page 52: Instrument An

    Instrument an d control functions 3-38 3 eau54151 openin g an d closin g the cowl- in g vents the cowling vents can be opened 20 mm (0.79 in) for added ventilation to suit the riding conditions. To open a cowlin g vent 1. Remove the quick fastener. 2. Slide the cowling vent panel for- ward to unhook...

  • Page 53: Instrument An

    Instrument an d control functions 3-39 3 4. Install the quick fastener. Tip make sure that the cowling vent panels are properly installed before riding. Eau39672 rear view mirrors the rear view mirrors of this vehicle can be folded forward or backward for parking in narrow spaces. Fold the mir- rors...

  • Page 54: Instrument An

    Instrument an d control functions 3-40 3 eau54141 a d justin g the front fork warning ewa14671 always a d just the sprin g preloa d on b oth fork le g s equally, otherwise poor han d lin g an d loss of sta b ility may result. Each front fork leg is equipped with a spring preload adjusting bolt. The ...

  • Page 55: Instrument An

    Instrument an d control functions 3-41 3 compression d ampin g force the compression damping force is ad- justed on the right front fork leg only. To increase the compression damping force and thereby harden the com- pression damping, turn the adjusting screw in direction (a). To decrease the compre...

  • Page 56: Instrument An

    Instrument an d control functions 3-42 3 eau14917 a d justin g the shock a b sor b er assem b ly this shock absorber assembly is equipped with a spring preload adjust- ing lever and a rebound damping force adjusting knob. Notice eca16571 to avoi d d ama g in g the mechanism, d o not attempt to move ...

  • Page 57: Instrument An

    Instrument an d control functions 3-43 3 this may cause the unit to ex- plo d e d ue to excessive g as pressure. Do not d eform or d ama g e the cylin d er in any way. Cylin d er d ama g e will result in poor d ampin g performance. Do not d ispose of a d ama g e d or worn-out shock a b sor b er as- ...

  • Page 58: Instrument An

    Instrument an d control functions 3-44 3 eau63430 i g nition circuit cut-off system the ignition circuit cut-off system (comprising the sidestand switch, clutch switch and neutral switch) has the following functions. It prevents starting when the transmission is in gear and the sidestand is up, but ...

  • Page 59: Instrument An

    Instrument an d control functions 3-45 3 with the engine turned off: 1. Move the sidestand down. 2. Make sure that the start/engine stop switch is set to “ ”. 3. Turn the key on. 4. Shift the transmission into the neutral position. 5. Push the “ ” side of the start/engine stop switch. Does the engin...

  • Page 60: Instrument An

    Instrument an d control functions 3-46 3 eau39656 auxiliary dc jack warning ewa14361 to prevent electrical shock or short- circuitin g , make sure that the cap is installe d when the auxiliary dc jack is not b ein g use d . Notice eca15432 the accessory connecte d to the auxiliary dc jack shoul d no...

  • Page 61

    For your safety – pre-operation checks 4-1 4 eau63440 inspect your vehicle each time you use it to make sure the vehicle is in safe oper- ating condition. Always follow the inspection and maintenance procedures and schedules described in the owner’s manual. Warning ewa11152 failure to inspect or mai...

  • Page 62

    For your safety – pre-operation checks 4-2 4 clutch • check operation. • if soft or spongy, have yamaha dealer bleed hydraulic system. • check fluid level in reservoir. • if necessary, add specified brake fluid to specified level. • check hydraulic system for leakage. 6-23, 6-25 throttle g rip • mak...

  • Page 63: Operation An

    Operation an d important ri d in g points 5-1 5 eau15952 read the owner’s manual carefully to become familiar with all controls. If there is a control or function you do not understand, ask your yamaha dealer. Warning ewa10272 failure to familiarize yourself with the controls can lea d to loss of co...

  • Page 64: Operation An

    Operation an d important ri d in g points 5-2 5 eau54171 startin g the en g ine in order for the ignition circuit cut-off system to enable starting, one of the following conditions must be met: the transmission is in the neutral position. The transmission is in gear with the clutch lever pulled and ...

  • Page 65: Operation An

    Operation an d important ri d in g points 5-3 5 eau16673 shiftin g shifting gears lets you control the amount of engine power available for starting off, accelerating, climbing hills, etc. The gear positions are shown in the il- lustration. Tip to shift the transmission into the neu- tral position, ...

  • Page 66: Operation An

    Operation an d important ri d in g points 5-4 5 clutch lever in, use the brakes to slow the motorcycle, and continue to downshift as necessary. 4. Once the motorcycle has stopped, the transmission can be shifted into the neutral position. The neutral indicator light should come on and then the clutc...

  • Page 67: Operation An

    Operation an d important ri d in g points 5-5 5 eau16842 en g ine b reak-in there is never a more important period in the life of your engine than the period between 0 and 1600 km (1000 mi). For this reason, you should read the fol- lowing material carefully. Since the engine is brand new, do not pu...

  • Page 68: Operation An

    Operation an d important ri d in g points 5-6 5 eau17214 parkin g when parking, stop the engine, and then remove the key from the main switch. Warning ewa10312 since the en g ine an d exhaust system can b ecome very hot, park in a place where pe d estri- ans or chil d ren are not likely to touch the...

  • Page 69: Perio

    Perio d ic maintenance an d a d justment 6-1 6 eau17246 periodic inspection, adjustment, and lubrication will keep your vehicle in the safest and most efficient condition possible. Safety is an obligation of the vehicle owner/operator. The most im- portant points of vehicle inspection, adjustment, a...

  • Page 70: Perio

    Perio d ic maintenance an d a d justment 6-2 6 eau17303 emission controls not only function to ensure cleaner air, but are also vital to proper engine operation and maximum performance. In the following periodic maintenance charts, the services relat- ed to emissions control are grouped separately. ...

  • Page 71: Perio

    Perio d ic maintenance an d a d justment 6-3 6 eau46862 tip the annual checks must b e performe d every year, except if a kilometer- b ase d maintenance, or for the uk, a milea g e- b ase d maintenance, is performe d instea d . From 50000 km (30000 mi), repeat the maintenance intervals starting from...

  • Page 72: Perio

    Perio d ic maintenance an d a d justment 6-4 6 eau64031 general maintenance an d lu b rication chart no. Item 1 air filter element • clean. √ √ • replace. √ √ 2 * clutch • check operation, fluid level and vehicle for fluid leakage. √ √ √ √ √ 3 * front b rake • check operation, fluid level and vehicl...

  • Page 73: Perio

    Perio d ic maintenance an d a d justment 6-5 6 13 brake lever pivot shaft • lubricate with silicone grease. √ √ √ √ √ 14 brake pe d al pivot shaft • lubricate with lithium-soap- based grease. √ √ √ √ √ 15 clutch lever pivot shaft • lubricate with silicone grease. √ √ √ √ √ 16 shift pe d al pivot sha...

  • Page 74: Perio

    Perio d ic maintenance an d a d justment 6-6 6 eau55251 tip the air filter needs more frequent service if you are riding in unusually wet or dusty areas. Hydraulic brake and clutch service • regularly check and, if necessary, correct the brake and clutch fluid levels. • every two years replace the i...

  • Page 75: Perio

    Perio d ic maintenance an d a d justment 6-7 6 eau18773 removin g an d installin g pan- els the panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed. Eau54133 panel a to remove the...

  • Page 76: Perio

    Perio d ic maintenance an d a d justment 6-8 6 to install the panel 1. Fit the slot at the front of the panel under the projection on the front cowling, and then fit the slot at the rear of the panel over the projec- tion on the right side cowling as shown. Tip make sure that the fuses are covered a...

  • Page 77: Perio

    Perio d ic maintenance an d a d justment 6-9 6 3. Pull the bottom of the panel out- ward, pull the front of the panel downward, and then slide the panel forward to release it in the rear as shown. To install a panel 1. Place the panel in the original po- sition, and then install the bolts and the qu...

  • Page 78: Perio

    Perio d ic maintenance an d a d justment 6-10 6 eau19653 checkin g the spark plu g s the spark plugs are important engine components, which should be checked periodically, preferably by a yamaha dealer. Since heat and depos- its will cause any spark plug to slowly erode, they should be removed and c...

  • Page 79: Perio

    Perio d ic maintenance an d a d justment 6-11 6 eau36111 canister this model is equipped with a canister to prevent the discharging of fuel vapor into the atmosphere. Before operating this vehicle, make sure to check the following: check each hose connection. Check each hose and canister for cracks ...

  • Page 80: Perio

    Perio d ic maintenance an d a d justment 6-12 6 4. If the engine oil is below the mini- mum level mark, add sufficient oil of the recommended type to raise it to the correct level. To chan g e the en g ine oil (with or without oil filter cartri dg e replace- ment) 1. Place the vehicle on a level sur...

  • Page 81: Perio

    Perio d ic maintenance an d a d justment 6-13 6 8. Install the engine oil drain bolt and its new gasket, and then tighten the bolt to the specified torque. 9. Refill with the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. Tip be sure to wipe off spil...

  • Page 82: Perio

    Perio d ic maintenance an d a d justment 6-14 6 eau20017 final g ear oil the final gear case must be checked for oil leakage before each ride. If any leakage is found, have a yamaha deal- er check and repair the vehicle. In ad- dition, the final gear oil level must be checked and the oil changed as ...

  • Page 83: Perio

    Perio d ic maintenance an d a d justment 6-15 6 4. Install the final gear oil drain bolt and its new gasket, and then tight- en the bolt to the specified torque. 5. Refill with the recommended final gear oil to the brim of the filler hole. 6. Check the oil filler bolt gasket for damage, and replace ...

  • Page 84: Perio

    Perio d ic maintenance an d a d justment 6-16 6 4. If the coolant is at or below the minimum level mark, remove the coolant reservoir cap. Warning! Remove only the coolant reser- voir cap. Never attempt to re- move the ra d iator cap when the en g ine is hot. [ewa15162] 5. Add coolant or distilled w...

  • Page 85: Perio

    Perio d ic maintenance an d a d justment 6-17 6 eau72990 cleanin g the air filter element the air filter element should be cleaned or replaced at the intervals specified in the periodic maintenance and lubrica- tion chart. Clean or, if necessary, re- place the air filter element more frequently if y...

  • Page 86: Perio

    Perio d ic maintenance an d a d justment 6-18 6 8. Install the intake air shroud by in- stalling the screw and the quick fastener screws. 9. Install the panel. Eau44735 checkin g the en g ine i d lin g spee d check the engine idling speed and, if necessary, have it corrected by a yamaha dealer. 1. F...

  • Page 87: Perio

    Perio d ic maintenance an d a d justment 6-19 6 eau21386 checkin g the throttle g rip free play measure the throttle grip free play as shown. Periodically check the throttle grip free play and, if necessary, have a yamaha dealer adjust it. Eau21402 valve clearance the valve clearance changes with us...

  • Page 88: Perio

    Perio d ic maintenance an d a d justment 6-20 6 eau64410 tires tires are the only contact between the vehicle and the road. Safety in all con- ditions of riding depends on a relatively small area of road contact. Therefore, it is essential to maintain the tires in good condition at all times and rep...

  • Page 89: Perio

    Perio d ic maintenance an d a d justment 6-21 6 tip the tire tread depth limits may differ from country to country. Always com- ply with the local regulations. Warning ewa10472 have a yamaha d ealer replace excessively worn tires. Besi d es b ein g ille g al, operatin g the vehi- cle with excessivel...

  • Page 90: Perio

    Perio d ic maintenance an d a d justment 6-22 6 warning ewa10601 this motorcycle is fitte d with super- hi g h-spee d tires. Note the followin g points in or d er to make the most ef- ficient use of these tires. Use only the specifie d replace- ment tires. Other tires may run the d an g er of b urst...

  • Page 91: Perio

    Perio d ic maintenance an d a d justment 6-23 6 eau22074 clutch lever since this model is equipped with a hy- draulic clutch, adjusting the clutch le- ver free play is not needed. However, it is necessary to check the clutch fluid level and check the hydraulic system for leakage before each ride. (s...

  • Page 92: Perio

    Perio d ic maintenance an d a d justment 6-24 6 eau22283 brake li g ht switches the brake light, which is activated by the brake pedal and brake lever, should come on just before braking takes effect. Since the brake light switches are components of the cruise control system, they must be adjusted b...

  • Page 93: Perio

    Perio d ic maintenance an d a d justment 6-25 6 eau22501 rear b rake pa d s check each rear brake pad for damage and measure the lining thickness. If a brake pad is damaged or if the lining thickness is less than 0.8 mm (0.03 in), have a yamaha dealer replace the brake pads as a set. Eau40272 checki...

  • Page 94: Perio

    Perio d ic maintenance an d a d justment 6-26 6 clutch tip the rear brake fluid reservoir is located behind panel c. (see page 6-7.) warning ewa16031 improper maintenance can result in loss of b rakin g a b ility or clutch oper- ation. O b serve these precautions: insufficient b rake or clutch flui ...

  • Page 95: Perio

    Perio d ic maintenance an d a d justment 6-27 6 eau22754 chan g in g the b rake an d clutch flui d s have a yamaha dealer change the brake and clutch fluids at the intervals specified in the periodic maintenance and lubrication chart. In addition, have the oil seals of the brake and clutch master cy...

  • Page 96: Perio

    Perio d ic maintenance an d a d justment 6-28 6 eau23115 checkin g an d lu b ricatin g the throttle g rip an d ca b le the operation of the throttle grip should be checked before each ride. In addition, the cable should be lubricat- ed by a yamaha dealer at the intervals specified in the periodic ma...

  • Page 97: Perio

    Perio d ic maintenance an d a d justment 6-29 6 eau43602 checkin g an d lu b ricatin g the b rake an d clutch levers the operation of the brake and clutch levers should be checked before each ride, and the lever pivots should be lu- bricated if necessary. Brake lever clutch lever eau23215 checkin g ...

  • Page 98: Perio

    Perio d ic maintenance an d a d justment 6-30 6 eau23252 lu b ricatin g the rear suspen- sion the pivoting points of the rear suspen- sion must be lubricated by a yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. Eaum1653 lu b ricatin g the swin g arm piv- o...

  • Page 99: Perio

    Perio d ic maintenance an d a d justment 6-31 6 eau23273 checkin g the front fork the condition and operation of the front fork must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart. To check the con d ition check the inner tubes for scratches, damag...

  • Page 100: Perio

    Perio d ic maintenance an d a d justment 6-32 6 eau23292 checkin g the wheel b earin g s the front and rear wheel bearings must be checked at the intervals specified in the periodic maintenance and lubrica- tion chart. If there is play in the wheel hub or if the wheel does not turn smoothly, have a ...

  • Page 101: Perio

    Perio d ic maintenance an d a d justment 6-33 6 batteries pro d uce explosive hy- d ro g en g as. Therefore, keep sparks, flames, ci g arettes, etc., away from the b attery an d pro- vi d e sufficient ventilation when char g in g it in an enclose d space. Keep this and all batter- ies out of the rea...

  • Page 102: Perio

    Perio d ic maintenance an d a d justment 6-34 6 eau54515 replacin g the fuses the fuse boxes and individual fuses are located under panel a. (see page 6-7.) if a fuse is blown, replace it as follows. 1. Turn the key to “off” and turn off the electrical circuit in question. 2. Remove the blown fuse, ...

  • Page 103: Perio

    Perio d ic maintenance an d a d justment 6-35 6 3. Turn the key to “on” and turn on the electrical circuit in question to check if the device operates. 4. If the fuse immediately blows again, have a yamaha dealer check the electrical system. Eau72980 vehicle li g hts this model is equipped with full...

  • Page 104: Perio

    Perio d ic maintenance an d a d justment 6-36 6 eau25872 trou b leshootin g although yamaha motorcycles receive a thorough inspection before shipment from the factory, trouble may occur during operation. Any problem in the fuel, compression, or ignition systems, for example, can cause poor starting ...

  • Page 105: Perio

    Perio d ic maintenance an d a d justment 6-37 6 eau63470 trou b leshootin g charts startin g pro b lems or poor en g ine performance 1. Fuel there is enough fuel. There is no fuel. Check the battery. Supply fuel. The engine turns over quickly. The engine turns over slowly. The engine does not start....

  • Page 106: Perio

    Perio d ic maintenance an d a d justment 6-38 6 en g ine overheatin g warning ewat1041 do not remove the ra d iator cap when the en g ine an d ra d iator are hot. Scal d in g hot flui d an d steam may b e b lown out un d er pressure, which coul d cause serious injury. Be sure to wait until the en g ...

  • Page 107: Motorcycle Care An

    Motorcycle care an d stora g e 7-1 7 eau37834 matte color caution notice eca15193 some mo d els are equippe d with matte colore d finishe d parts. Be sure to consult a yamaha d ealer for a d vice on what pro d ucts to use b e- fore cleanin g the vehicle. Usin g a b rush, harsh chemical pro d ucts or...

  • Page 108: Motorcycle Care An

    Motorcycle care an d stora g e 7-2 7 structe d . Also, thorou g hly rinse the area off with water, imme d i- ately d ry it, an d then apply a cor- rosion protection spray. Improper cleanin g can d ama g e plastic parts (such as cowlin g s, panels, win d shiel d s, hea d li g ht lenses, meter lenses,...

  • Page 109: Motorcycle Care An

    Motorcycle care an d stora g e 7-3 7 2. After drying the motorcycle, apply a corrosion protection spray on all metal, including chrome- and nickel-plated, surfaces to prevent corrosion. Windshield cleaning avoid using any alkaline or strong acid cleaner, gasoline, brake fluid, or any other solvent. ...

  • Page 110: Motorcycle Care An

    Motorcycle care an d stora g e 7-4 7 eau26244 stora g e short-term always store your motorcycle in a cool, dry place and, if necessary, protect it against dust with a porous cover. Be sure the engine and the exhaust sys- tem are cool before covering the mo- torcycle. Notice eca10811 storin g the mot...

  • Page 111: Motorcycle Care An

    Motorcycle care an d stora g e 7-5 7 tip make any necessary repairs before storing the motorcycle. Ub88e0e0.Book page 5 friday, october 16, 2015 11:59 am.

  • Page 112: Specifications

    Specifications 8-1 8 dimensions: overall length: 2230 mm (87.8 in) overall width: 750 mm (29.5 in) overall height: 1325/1455 mm (52.2/57.3 in) seat height: 805/825 mm (31.7/32.5 in) wheelbase: 1545 mm (60.8 in) ground clearance: 130 mm (5.12 in) minimum turning radius: 3.1 m (10.17 ft) wei g ht: cur...

  • Page 113: Specifications

    Specifications 8-2 8 2nd: 1.722 (31/18) 3rd: 1.350 (27/20) 4th: 1.111 (30/27) 5th: 0.963 (26/27) 6th: 0.846 (22/26) chassis: frame type: diamond caster angle: 26.0 ° trail: 109 mm (4.3 in) front tire: type: tubeless size: 120/70 zr17m/c (58w) manufacturer/model: bridgestone/bt023f f rear tire: type:...

  • Page 114: Specifications

    Specifications 8-3 8 battery: model: gt14b-4 voltage, capacity: 12 v, 12.0 ah (10 hr) bul b watta g e × quantity: headlight: led brake/tail light: led front turn signal light: led rear turn signal light: led auxiliary light: led license plate light: led meter lighting: led neutral indicator light: l...

  • Page 115: Consumer Information

    Consumer information 9-1 9 eau53562 i d entification num b ers record the vehicle identification num- ber, engine serial number, and the model label information in the spaces provided below. These identification numbers are needed when registering the vehicle with the authorities in your area and wh...

  • Page 116: Consumer Information

    Consumer information 9-2 9 label in the space provided. This infor- mation will be needed when ordering spare parts from a yamaha dealer. Eau69910 dia g nostic connector the diagnostic connector is located as shown. 1. Diagnostic connector 1 ub88e0e0.Book page 2 friday, october 16, 2015 11:59 am.

  • Page 117

    10-1 10 in d ex a abs ...................................................... 3-26 abs warning light................................... 3-5 accessory box...................................... 3-36 air filter element, cleaning .................... 6-17 auxiliary dc jack ..................................

  • Page 118

    In d ex 10-2 10 storage compartments .........................3-35 swingarm pivots, lubricating ................6-30 t throttle grip and cable, checking and lubricating...........................................6-28 throttle grip free play, checking ...........6-19 tires ...............................

  • Page 119

    Ub88e0e0.Book page 3 friday, october 16, 2015 11:59 am.

  • Page 120

    Dic183 original instructions printed on recycled paper printed in japan 2015.11-0.3×1 cr (e).