Yamaha PJP-25UR User Manual - Testing The Audio
16
Check the audio in the current setting. The audio is
automatically recorded (five seconds) and played back.
You can easily listen to the audio from this unit as a test.
1
In the "PJP-25UR Controller" screen,
click "Detail".
The "Detail" screen appears.
2
Click "Start".
The audio test starts.
If you cancel the audio test, click "Cancel".
Contents of test
Follow the procedure below to reset the settings of this
unit. You can specify whether to keep the settings saved to
the setting numbers.
Please note the followings when you reset the settings of this unit.
• This operation will clear all settings you changed and restore
the factory default values.
• If you reset all settings, the settings saved to the setting numbers
are also cleared.
• You cannot undo the reset operation.
■Resetting all settings
1
In the "PJP-25UR Controller" screen,
click "DETAIL".
The "DETAIL" screen appears.
2
Uncheck the "Don't reset settings
already saved" box.
3
Click "Reset".
All settings are reset to default.
To complete the reset operation, you need to restart this unit in
some cases. If the message to restart this unit appears, follow the
message to restart it.
■Resetting this unit except settings saved
to the setting numbers
1
In the "PJP-25UR Controller" screen,
click "DETAIL".
The "DETAIL" screen appears.
2
Check the "Don't reset settings already
saved" box.
3
Click "Reset".
This unit is reset to default except settings saved to
the setting numbers.
To complete the reset operation, you need to restart this unit in
some cases. If the message to restart this unit appears, follow the
message to restart it.
Testing the audio
Alarm
Operation
First
Starts recording
Second
Starts playing back
Third
Finishes the test
Resetting the settings of this unit
Note
Note
Note