Yamaha PJP-50R Basic Operation Manual - History
Communication through IP Network
9
B
A
SIC CALL
OPERA
T
IONS
English
Follow the procedure below to call another party by
referring to the history of past outgoing or incoming calls.
If the destination obtains the IP address from a DHCP server, its
IP address may have changed from the last call. If your call
cannot reach the destination unit, check the latest IP address
configured at the destination.
1
Press
repeatedly until the initial display
appears.
2
Press .
The menu screen appears.
3
Press or to select “Call History”, and
then press
.
The “Call History” menu appears.
•
: Indicates an outgoing call.
•
: Indicates an incoming call.
•
: Indicates a missed call.
•
: Indicates an automatic incoming/outgoing call.
4
Press or to select the destination, and
then press
.
The calling display appears.
The IP addresses of this unit and destination appear if
the call is connected and conversation becomes
available.
y
If a destination is already registered in the address book, the name
registered for the destination is displayed instead of the IP
address.
Follow the procedure below to answer a call from another
party.
1
When an incoming call is received, press
.
When there is an incoming call, the back light of the
display lights up, and the ringing tone for the IP
network connection is generated.
The IP address of the destination appears in the
display.
y
• If the call is made by the party which is already registered
in the address book, the name registered for this unit is
displayed instead of the IP address.
• To deny a call, press
when the incoming call is
received.
2
To disconnect the call when the conference
is complete, press
.
Calling another party using the call
history
Note
3. Online
2. Call History
1. Settings
Menu
Phone
Headquarter
Headquarter
Call History
Answering a Call
Branch A
Headquarter
Headquarter
Call History
Headquarter
:Cancel
Menu
:Address
(192.168.100.200)
2007.09.20 12:16:14
Tel & IP ready
192.168.0.10