Yamaha PLG100-VL Owner's Manual - English

ENGLISH

17

Editing VL Voice Part Parameters

• Please note that with many voices accurate keyboard/controller pitch is produced only at medium embou-

chure.

3. Embouchure

Emb CC No. (Embouchure Control Change Number) ... Settings: off … 95, AT, VEL, PB

“Embouchure” corresponds to the tightness of the lips against the reed or against each

other. In a string instrument voice embouchure corresponds to how strongly the bow is

pressed against the string. Affects both pitch and timbre. The “Emb CC No.” param-

eter specifies the controller to be used for embouchure control. When set to “off”

medium embouchure is applied at all times.

PrsCtrlDpt (Pressure Control Depth) ..................................... Settings: -64 … +63

Sets the amount of variation produced by the controller assigned to pressure. The higher

the value the greater the variation. Positive values cause an increase in pressure in

response to higher controller values (e.g. increased breath pressure or higher modula-

tion wheel position), while minus values cause a decrease in pressure in response to

higher controller values.

EmbCtrlDpt (Embouchure Control Depth) ............................ Setting:  -64 … +63

Sets the amount of variation produced by the controller assigned to embouchure. The

higher the value the greater the variation. Positive values cause an increase in embou-

chure in response to higher controller values (e.g. increased breath pressure or higher

modulation wheel position), while minus values cause an decrease in embouchure in

response to higher controller values.