Z-World RabbitCore RCM3200 User Manual - page 29

User’s Manual

25

It is recommended that you allow for an “exclusion zone” of 0.04" (1 mm) around the 

RCM3200 in all directions (except above the RJ-45 plug) when the RCM3200 is incorpo-

rated into an assembly that includes other printed circuit boards. This “exclusion zone” 

that you keep free of other components and boards will allow for sufficient air flow, and 

will help to minimize any electrical or electromagnetic interference between adjacent 

boards. An “exclusion zone” of 0.08" (2 mm) is recommended below the RCM3200 

when the RCM3200 is plugged into another assembly using the shortest connectors for 

headers J1 and J2. Figure A-2 shows this “exclusion zone.”

Figure A-2.  RCM3200 “Exclusion Zone”

0.08

(2)

0.08

(2)

0.6

(16)

1.93

(49.0)

0.6

(16)

J1

J2

Exclusion

Zone

2.725

(69.2)

1.850

(47.0)