Z-World RabbitCore RCM3200 User Manual - 1. I
User’s Manual
1
1. I
NTRODUCTION
The RCM3200 RabbitCore module is designed to be the heart of
embedded control systems. The RCM3200 features an inte-
grated 10/100Base-T Ethernet port and provides for LAN and
Internet-enabled systems to be built as easily as serial-communi-
cation systems.
The RCM3200 has a Rabbit 3000 microprocessor operating at 44.2 MHz, data and pro-
gram execution SRAM, flash memory, two clocks (main oscillator and timekeeping), and
the circuitry necessary for reset and management of battery backup of the Rabbit 3000’s
internal real-time clock and the data SRAM. Two 34-pin headers bring out the Rabbit
3000 I/O bus lines, parallel ports, and serial ports.
The RCM3200 receives its +3.3 V power from the customer-supplied motherboard on
which it is mounted. The RabbitCore RCM3200 can interface with all kinds of CMOS-
compatible digital devices through the motherboard.
1.1 RCM3200 Features
•
Small size:
1.85" x 2.65"” x 0.86"
(47 mm × 67 mm × 22 mm)
•
Microprocessor: Rabbit 3000 running at 44.2 MHz
•
52 parallel 5 V tolerant I/O lines: 44 configurable for I/O, 4 fixed inputs, 4 fixed outputs
•
Two additional digital inputs, two additional digital outputs
•
External reset input
•
Alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with
parallel I/O lines), I/O read/write
•
Ten 8-bit timers (six cascadable) and one 10-bit timer with two match registers
•
512K flash memory, 512K program execution SRAM, 256K data SRAM
•
Real-time clock
•
Watchdog supervisor
•
Provision for customer-supplied backup battery via connections on header J2