Z-World RabbitCore User Manual - page 20

14

RabbitCore RCM3600

3.2  Sample Programs

Of the many sample programs included with Dynamic C, several are specific to the 

RCM3600. Sample programs illustrating the general operation of the RCM3600, serial 

communication, and the A/D converter on the Prototyping Board are provided in the 

SAMPLES\RCM3600

 folder. Each sample program has comments that describe the purpose 

and function of the program. Follow the instructions at the beginning of the sample pro-

gram. Note that the RCM3600 must be installed on the Prototyping Board when using 

these sample programs. Sample programs for the optional LCD/keypad module are 

described in Appendix C.

•

CONTROLLED.c

—Demonstrates use of the digital inputs by having you turn the LEDs 

on the Prototyping Board on or off from the 

STDIO

 window on your PC.

Once you compile and run 

CONTROLLED.C

, the following display will appear in the 

Dynamic C 

STDIO

 window.

Press “1” or “2” on your keyboard to select LED DS1 or DS2 on the Prototyping 

Board. Then follow the prompt in the Dynamic C 

STDIO

 window to turn the LED 

on or off.

•

FLASHLED.c

—Demonstrates the use of assembly language to flash LEDs DS1 and 

DS2 on the Prototyping Board at different rates. Once you have compiled and run this 

program, LEDs DS1 and DS2 will flash on/off at different rates.