Z-World RabbitCore User Manual - page 86
of
138
80
RabbitCore RCM3600
B.4.3 Serial Communication
The RCM3600 Prototyping Board allows you to access five of the serial ports from the
RCM3600 module. Table B-4 summarizes the configuration options.
Serial Port E is configured in hardware for RS-232 or RS-485 via jumpers on header JP2
as shown in Section B.5. Serial Port F is configured in software for the IrDA transceiver in
lieu of Serial Ports C and D.
Table B-4. RCM3600 Prototyping Board Serial Port Configurations
Serial Port
Signal Header
Configured via
Header
Default Use
Alternate Use
C
J2
JP2
RS-232
—
D
J2
JP2
RS-232
—
E
J1, J2
JP1, JP2
RS-485 (J1)
RS-232 (J2)