Z-World RabbitCore User Manual - page 65
of
138
User’s Manual
59
A.1.1 Headers
The RCM3600 uses one header at J1 for physical connection to other boards. J1 is a
2 × 20 SMT header with a 0.1" pin spacing.
Figure A-3 shows the layout of another board for the RCM3600 to be plugged into. These
values are relative to the designated fiducial (reference point).
Figure A-3. User Board Footprint for RCM3600
1.519
(38.6)
RCM3600 Footprint
J1
0.597
(15.2)
1.100
(27.9)
1.629
(41.4)