Zach And Dani's Coffee roaster Instructional Manual - page 4
Control Panel
Your Roaster has an easy to use Control Panel (refer to Diagram 2 below).
Diagram 2 – Control Panel
Zach & Dani’s™ Instructional Guide and Roasting Journal
5
Description of Parts
Gourmet Coffee Roaster
Your Roaster comes complete with easy to assemble parts (Refer to Diagram 1
below). Roaster parts are easily identifiable:
1. Cover
4. Cut Off Switch
7. Front Seal
2. Rear Seal
5. Chaff Cup
8. Auger
3. Roaster Base
6. Screen
9. Roasting Chamber
Note: The Chaff Cup, the screen located in the Cover, as well as the Roasting
Chamber, must be cleaned between every use to ensure proper and safe functioning
of your roaster.
CAUTION: Not cleaning these parts or operating the machine without proper
installation will shorten the life of the roaster and can create the opportunity
for the roaster to overheat and malfunction. Make sure that all washable
components are completely dry before using.
All metal surfaces become extremely hot during the roasting process and should
never be handled or touched during or directly following a roast cycle.
Diagram 1 – Components of Zach and Dani’s Roaster
4
Zach & Dani’s™ Instructional Guide and Roasting Journal
RED LIGHT is only lit during
roast cycle
LCD count down
timer display
“UP” arrows adds
minutes to roast cycle
“COOL” when pressed
will eliminate any time
left on the roast cycle
and will start a 5 minute
cool down process
GREEN LIGHT is only lit during
the cool down cycle
“RECALL” remembers the time setting
the last time the start button was pushed
“DOWN” arrows
decrease minutes
to roast cycle
“START”
begins roast cycle
1. Cover
2. Rear Seal
5. Chaff Cup
7. Front Seal
9. Roasting
Chamber
8. Auger
3. Roaster
Base
4. Cut Off
Switch
6. Screen