Ver. 150806 to ensure safe and easy installation, please read the following precautions www.Zalman.Com user’s manual cnps9900 series cnps9900 max cnps9900a led / nt intel socket lga 2011 v3/2011/ 1366 / 1156 / 1155 / 1151 / 1150 / 775 cpus amd socket fm2 / fm1 / am3+ / am3 / am2+ / am2 cpu&apus inte...
1 .Com 1. Precautions 2. Specifications 1) avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries. 2) do not ingest the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or i...
2 .Com 3. Components 1) common components thermal grease [zm-stg2] loading block side caps nuts double-sided tape backplate resistor allen wrench (3/32") user’s manual cooler silver bolts b (3mm) (socket lga 1156/1155/ 1151/1150/775/amd) silver bolts a (4mm) (socket lga 2011 v3/ 2011 cnps9900max onl...
3 .Com 4. Installation requirements 1) space requirements the installation requires unobstructed space of 133mm (width) x 96mm (length) x 154mm (height) with the cpu as the central reference point. Before installation, please check if memory modules or motherboard heatsinks will not have any clearan...
4 .Com 5. Installation a . Intel socket installation (go to page 8 for amd sockets) 1) intel socket 2011 v3 / 2011 installation (cnps9900 max series only) apply thermal grease just enough to thinly cover the cpu surface. Then, insert four silver bolts (type a) through the outermost intel clip holes,...
5 .Com socket 775 socket 1156/1155/1151/1150 socket 1366 take note of the orientation of the nuts and the side caps. X o caution 2) intel socket lga 1366/1156/1155/1151/1150/775 installation ① insert the nuts to the backplate according to the socket type and secure them with side caps. 1 2 ② socket ...
6 .Com ③ socket lga775 installation peel off the loading block cover and attach it to the backplate with the sticky side facing the center of the backplate. Peel off one side of the double-sided tape and attach it with the sticky side facing the loading block. Then, peel off the top cover. Double-si...
7 .Com ④ attach the backplate assembly to the back side of the motherboard by aligning the nuts to the motherboard mountingholes. If you were unsuccessful at first attempt, you may continue with the installation without the double-sided tape as it is not a necessary component. M/b gold bolt (socket ...
8 .Com 1) amd socket fm2/ fm1/am3+/am3/am2+/am2 installation ① partially unscrew the four bolts located on the base of the cpu cooler. Then, insert the amd clips between the base and the heatpipe cover, with the clips bent away from the heatsink. B. Amd socket installation ② insert the nuts to the b...
9 .Com ③ peel off the loading block cover and attach it to the backplate with the sticky side facing the center of the backplate. Caution please note that the sticky side of the loading block serves to attach the loading block to the backplate. Peel off one side of the double-sided tape and attach i...
10 .Com ⑤ attach the backplate assembly to the back side of the motherboard by aligning the nuts to the motherboard mounting holes. If you were unsuccessful at first attempt, you may continue with the installation without the double-sided tape as it is not a necessary component. M/b silver bolt b (3...
