ZALMAN CNPS9900 Max User manual - .Com
10
.COM
⑤
Attach the Backplate assembly to
the back side of the motherboard by
aligning the Nuts to the motherboard
mounting holes.
If you were unsuccessful at first attempt,
you may continue with the installation
without the Double-sided Tape as it is
not a necessary component.
M/B
Silver Bolt B
(3mm)
⑥
Apply thermal grease just enough to thinly cover the CPU surface. Then, insert
four Silver Bolts B through the AMD Clip holes, and using the 3/23" Allen Wrench,
fasten the Bolts incrementally while alternating between
them.
Allen Wrench
M/B
Please make sure that PWM Control Mode is activated in the motherboard’s BIOS settings.
Caution
⑦
Connect the cooler’s 4-pin connector to the
motherboard’s CPU Fan header.
M/B
Fan RPM-reducing
resistance
M/B
Please make sure to use the
Bolts with correct color and
thread length as they can
appear quite similar.
Gold Bolts
(Socket LGA 1366)
Sliver Bolts A (4mm)
(Socket LGA 2011 V3
/ 2011)
Sliver Bolts B (3mm)
(Socket AMD/LGA
1156/1155/1151/1150/775)
Caution