Zanussi Electrolux ZOU270 User Manual - page 14
Removing the side rails
Pull the rails away from
the oven wall at the front
Unhook them at the back
Replace the side rails
Important! Important The rounded ends of the guide
bars must point to the front.
To install, first (1) and then .
1
2
Insert the rails in the
holes at the back
Lower into position at the
front and press them at
the back
Oven back lamp (for selected models only)
Warning! Risk of electric shock! Before replacing
the oven light bulb:
– Switch oven off.
– Unscrew the fuse from the fuse box or switch fuse
off.
To protect the oven light bulb and the glass cover,
lay a cloth on the floor of the oven.
Replacing the oven light bulb/Cleaning the glass
cover
1. Take off the glass cover by turning it anticlockwise
and clean it.
2. If necessary:
replace with a 40 Watt, 230V, 300°C heat-resist-
ant oven light bulb .
3. Refit the glass cover.
Replacing the side oven lamp/Cleaning the
glass cover (for selected models only)
1. Take out the left-hand side rails.
2. Remove the glass cover with the help of a small,
blunt object (e.g. a teaspoon) and clean it.
3. If necessary: replace halogen oven light bulb.
Order the replacement light bulb from the Custom-
er Care Department (see section "Service/Cus-
tomer Care Department").
Always touch the halogen light bulb using a cloth
to avoid grease contamination.
4. Refit the glass cover.
5. Replace the side rails.
14