Zanussi Electrolux ZOU270 User Manual - Use, Tables and Tips
Clock Functions
• Countdown - See appropriate chapter on setup.
A signal sounds after the time has elapsed. This
function does not affect the functioning of the oven.
• Cook time
- is used to set the desired period
of cooking time.
• End time
- when set the appliance is turned off
at desired time.
• Time - shows the current time.
How to use the clock functions
• After a function has been selected, the correspond-
ing function indicator flashes for about 5 seconds.
During this period, the desired times can be set using
the increase or decrease button.
• When the desired time has been set, the function
indicator continues to flash for approx. 5 seconds.
After that the function indicator is then lit. The set
time begins to run.
• Press any of the buttons to stop the audible signal.
• The desired oven function and temperature can be
selected before or after the clock functions Cook
time
and End time
are set.
• When the cooking process is completed, turn the
oven function dial and the temperature selector back
to the OFF position.
Countdown
1. Press the Mode button repeatedly until the
function indicator Countdown flashes.
2. Using the increase or decrease button set
the desired Countdown (max. 2 hours 30 minutes).
3. After approx. 5 seconds the display shows the time
remaining. The function indicator Countdown
lights up.
4. When the time has elapsed, the function indicator
flashes and an audible signal sounds for 2 minutes.
The signal can be stopped by pressing any button.
Cook time
1. Press the Mode button repeatedly until the
function indicator Cook time
flashes.
2. Using the increase or decrease button set
the desired cooking time.
After approx. 5 seconds the display returns to
showing the current time. The function indicator
Cook time
lights up.
When the time has elapsed, the function indicator
flashes, an audible signal sounds for 2 minutes and
the oven switches itself off.
3. The signal and the programme can be stopped by
pressing any button.
End time
1. Press the Mode button repeatedly until the
function indicator End time
flashes.
2. Using the increase or decrease button set
the desired switch-off time.
After approx. 5 seconds the display returns to
showing the current time. The function indicator
End time
lights up.
When the time has elapsed, the function indicator
flashes, an audible signal sounds for 2 minutes and
the oven switches itself off.
3. The signal and the programme can be stopped by
pressing any button.
Use, tables and tips
Baking
Oven levels
• Baking with Conventional Cooking is only possible
on one level.
• When baking with Fan Cooking one to two baking
trays can be put into the bottom oven at the same
time:
7