Zanussi Electrolux ZOU270 User Manual - Installation
Problem
Possible Solution
Leave the grill door open and allow the grill to cool. After a couple of
hours check that the grill works as normal
The indicator neons are not working
correctly.
Check that you have selected only the function you require. Ensure all
other controls are in the off position.
The oven is not cooking evenly.
Check that the appliance is correctly installed and is level.
Check that the recommended temperatures and shelf positions are be-
ing used.
The oven light fails to illuminate.
The oven light bulb may need replacing.
The oven fan is noisy.
Check that the oven is level.
Check that the shelves and bakeware are not vibrating in contact with
the oven back panel.
The oven temperature is too high or
too low.
Check that the recommended temperatures and shelf positions are be-
ing used. Be prepared to adjust the temperature up or down slightly to
achieve the results you want.
Installation
• The set-up of the electrical installation is arranged
so that the appliance can be isolated from the mains
with a minimum 3 mm all-pole contact separation.
Suitable isolation devices include, for example, cir-
cuit breakers, fuses (screw type fuses are to be re-
moved from the holder), RCDs and contactors.
• Anti-shock protection must be provided by the in-
stallation.
• The built-in unit must meet the stability requirements
of DIN 68930.
• Built-in cookers and cooking surfaces are equipped
with special attachment systems. For safety rea-
sons, they must only be combined with appliances
from the same manufacturer.
The use of heat protection strips is prohibited for cook-
ers and ovens with Pyrolytic Cleaning, if the recess has
a rear wall and closed ground-level compartment.
However installation is possible with a ground-level
compartment that has been shortened by at least 20
mm and which has base ventilation of the same cross-
section.
720 mm
560 mm
320 mm
320 mm
40 mm
551 mm
364 mm
90°
90°
2x
15x
2x
18